29658

Sony TCWE675 Manual

13
Zoom out
Zoom in
Previous page
1/24
Next page
13
Recording on a Tape
Tips
• You should adjust the recording level manually
with REC LEVEL in the following cases:
– The recording level cannot be adjusted properly
due to excessive noise in the program source.
– The program source level is too low and the
recording level does not increase.
During a quiet passage in a program source such
as classical music, the recording level may not
increase for some time. If a high sound level is
expected later on in the track, play that portion
first so that the right adjustment can be obtained.
– The recording level does not decrease for a long
time. The Auto Rec Level function may not
work properly when you try to record sound
produced by a graphic equalizer that has
extremely high-level signals.
• To prevent changes in the recording level after
recording starts, press z REC while playing the
highest sound level portion of the program source to
be recorded. The result is a more natural-sounding
recording.
• If you play the entire program source after the
AUTO indicator has stopped flashing and is lit
continuously, the deck will set the recording level
for the portion of the program source with the
highest signal level.
• After you have finished recording with the Auto
Rec Level function, the AUTO indicator remains on
and the recording level setting remains the same.
To cancel the setting, do one of the following:
– Press ARL to turn off the AUTO indicator
– Turn REC LEVEL
– Turn the deck off.
Fading in and out
— Fader
You can gradually increase the recording level
at the beginning of a recording (fade in) or
gradually decrease the recording level at the
end of a recording (fade out).
It is convenient to use this function, for
example, when the tape reaches to its end and
you don’t want the track to be cut off abruptly.
To Do the following:
Fade in 1 Follow Steps 1 to 4 of “Recording
on a tape” on page 10.
2 Start playing the program source and
press FADER at the point where you
want the fade-in to start. During
fade-in, the AUTO indicator flashes.
When the fade-in has completed, the
AUTO indicator lights up if the Auto
Rec Level function is working, or
goes off if the Auto Rec Level
function is not working.
Fade out While you’re still recording, press
FADER at the point where you want
the fade-out to start. When the fade-out
has completed, “REC” flashes in the
display and the deck pauses.
Note
Fade-in or fade-out is not possible when REC LEVEL
is manually set to 0 (minimum) (see page 11).
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony TCWE675 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony TCWE675 in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info