29658
12
Zoom out
Zoom in
Previous page
1/24
Next page
12
Adjusting bias and recording level
calibration automatically (continued)
5 Start the actual recording (see page
10).
To cancel the Automatic Calibration
function
Press x on the deck you’re using.
If “A” or “B” flashes continuously
The automatic calibration procedure has been
interrupted by:
The end of the tape. Reverse the tape
direction or rewind the tape to a new position
that allows recording of the test tone.
Damaged tape or dirty heads. Change the
cassette or clean and demagnetize the heads
(see page 21).
Updating the calibration
setting
If you load a cassette and “A CAL” or “CAL
B” appears in the display, it means that
automatic calibration data in that deck for that
tape type (I, II or IV) exists. However, we
recommend that you repeat the automatic
calibration procedure each time you load a new
cassette since cassettes of the same type also
vary in their characteristics.
Before recalibrating, be sure to turn off “A
CAL” or “CAL B” by pressing the DECK A
or DECK B button. Then start from Step 2 of
the automatic calibration procedure.
Adjusting the recording
level automatically
Auto Rec Level
The Auto Rec Level function automatically
measures the peak signal level and adjusts the
recording level accordingly. The Auto Rec
Level function operates during normal
recording, Relay Recording* or Simultaneous
Recording* on either deck.
* TC-WE675 only
1 Follow Steps 1 to 3 of Recording on a
tape on page 10.
Make sure that record-protect tabs on the
cassette have not been removed.
2 Press z REC.
The AUTO indicator flashes and the deck
automatically adjusts the recording level.
The AUTO indicator lights up continuously
after the recording level has been adjusted.
3 Press X PAUSE or H.
Recording starts.
To cancel the Auto Rec Level
function
Press ARL or turn REC LEVEL to turn off the
AUTO indicator. If you do either of these
during recording, recording will continue but
with the Auto Rec Level function turned off.
To stop recording
Press x.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony TCWE675 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony TCWE675 in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info