699858
50
Zoom out
Zoom in
Previous page
1/73
Next page
Administrating the Camera
Setting the PTZF control — PTZF control Menu
50
Preset tour Tab — Setting a preset
tour
Up to 16 positions can be programmed, and the camera
moves to the programmed positions sequentially (Tour).
Up to five programs can be set as Tours A to E.
Preview screen
This screen is for monitoring images and configuring
preset tour settings.
Tour
Check to enable the tour function.
Resume time on inactivity
This item becomes active when Tour is set to On.
With this item, you can select whether you restart or stop
the tour after it has stopped by manual pan, tilt or zoom
operation or by camera movement to the preset position
triggered by an alarm.
Select the checkbox to set the resume time on inactivity.
Specify the wait time before the tour restarts, between 5
and 3600 seconds. The tour restarts automatically after
the specified time has elapsed.
Tour A to Tour E
Configure Tour A to Tour E respectively. Select the
checkbox to operate the tour.
Sequence
Set the sequence of the tour.
The preset positions saved using the Preset position tab
are displayed in the drop-down list at the bottom.
Select the preset position, then click Add. The selected
preset position is added in the Sequence list. Repeat this
procedure to specify the preset positions in sequence.
You can check the preset position by clicking Call.
To delete the preset position, click to select it in the list
and then click Delete.
To change the order in the list, select the preset position
and then click Move up or Move down.
To delete all preset position, click Delete All.
Speed
Select the speed of camera movement between 1 and 23,
or Fastest from the drop-down list. The camera moves
faster with a higher number setting. The fastest speed is
obtained with Fastest.
Stay time
Type a period of time during which the camera is to stay
at each preset position, between 1 and 3600 seconds.
Preview
Previews the order of movements of the selected tour.
The operation speed and stop time do not influence the
preview operation.
Stop
Stops the preview in action.
OK/Cancel
See “Buttons common to every menu” on page 21.
Serial Tab
Perform settings to control the camera according to data
which is input by peripheral devices via an external
serial interface. This unit complies with the Pelco-D
protocol. Make the settings according to the peripheral
devices connected to the network.
Standard
Select RS422, RS485 (half-duplex) or RS485 (full-
duplex).
Termination
Select the checkbox if you want to terminate it.
Camera ID
Specify the Camera ID of this unit.
OK/Cancel
See “Buttons common to every menu” on page 21.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony SNC-WR632C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony SNC-WR632C in the language / languages: English as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony SNC-WR632C

Sony SNC-WR632C User Manual - German - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info