67640
20
Zoom out
Zoom in
Previous page
1/96
Next page
20
GB
Clearing programmed
steps of a Component
Macro
If you make a mistake in programming
steps or you want to programme a new
Component Macro, follow the procedure
below to clear the Component Macro.
1 While pressing the (light)
button, press the OTHER
button.
“SET MODE” appears as the screen
title.
2 Press the V/v buttons to
select “4 MACRO”, then press
the OK button or the centre
Label select button.
“MACRO” appears as the screen title.
Tip
If a number is displayed before the menu,
you can select the menu by pressing the
number button.
3 While pressing the
COMPONENT select button
or Label select button on
which the Component Macro
has been programmed, press
the (light) button.
A beep sounds and the Component
Macro is cleared.
4 Press the (light) button or
the RETURN button twice.
The set mode closes, and the Remote
Commander returns to standby for
operating the A/V components.
3 While pressing the SCROLL
button, press the
COMPONENT select button
or Label select button to
which the desired Component
Macro has been programmed.
“MACRO” and the selected A/V
component name appear on the first
line and the programmed steps are
listed on the screen.
4 Press the V/v buttons so that
the position of the delay
appears in the third line on the
screen, then press the
SCROLL button.
Delay is added between the second
line and the third line on the screen,
and “[DELAY]” appears in the third
line on the screen.
5 Press the OK button or centre
Label select button.
A beep sounds and programming is
complete.
6 Press the (light) button or
the RETURN button twice.
The set mode closes, and the Remote
Commander returns to standby for
operating the A/V components.
Notes
If remote sensors of A/V components are too
far apart from each other, or they are covered,
consecutive operation steps programmed on a
Component Macro may not be executed.
If a Component Macro is not executed
properly for any reason, such as mentioned
above, be sure to set all the A/V components
to the status before the Component Macro was
executed. Otherwise, A/V components will
not work properly next time the Component
Macro is executed.
Because some A/V components are designed
to turn on/off each time they receive the
power on/off signal, those components may
not be turned on with the Component Macro.
Check the power on/off status of the A/V
components before using the Component
Macro.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony RMVL1400T.CE7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony RMVL1400T.CE7 in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony RMVL1400T.CE7

Sony RMVL1400T.CE7 User Manual - German, Dutch, French, Italian - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info