67640
19
Zoom out
Zoom in
Previous page
1/96
Next page
19
GB
Continued
5 Press the DVD button, the
press the 1 (power) button.
6 Press the OTHER button
repeatedly, press the Label
select button corresponding to
the amplifier, then press the 1
(power) button.
7 Press the t (input select)
button repeatedly to select the
appropriate video input on the
TV to watch the DVD.
8 Press the input select button
on the amplifier to select the
appropriate audio input to
watch the DVD.
9 Press the DVD button, then
press N.
10
Press the (light) button.
A beep sounds and programming is
complete.
11
Press the (light) button or
the RETURN button twice.
The set mode closes, and the Remote
Commander returns to standby for
operating the A/V components.
Notes
If the procedure is interrupted at any point for
over 60 seconds, programming is cancelled.
You cannot continue from where you left off.
If you try to programme actions on a button
that already has a programmed Component
Macro, a beep sounds twice to alert you that
you cannot programme a Component Macro
on the button. In such a case, clear the
programmed Component Macro (page 20),
then start programming again from step 1.
•You cannot clear steps during the
programming procedure. If you make a
mistake in programming actions, finish
programming once and clear the Component
Macro (page 20), then start again from step 1.
•You can programme up to 32 consecutive
operation actions. When up to 32 steps are
programmed, programming of the Component
Macro is full. To change the programmed
steps, clear the Component Macro (page 20),
then start over from step 1.
Checking if a Component
Macro is executed properly
Follow the procedure below to check if
the programmed Component Macro
works as intended.
To execute a Component
Macro
1 Press and hold the
COMPONENT select button
on which the desired
Component Macro has been
programmed for over 2
seconds.
The signal transmission icon appears
on the screen, and the programmed
Component Macro is executed.
Tip
While the signal transmission icon ( )
appears and the Component Macro is executed,
“CANCEL” appears in the third line of the
screen. You can cancel executing the
Component Macro by pressing the right Label
select button.
To check the programmed
steps of a Component Macro
and add a delay action
Delay action allows you to set an interval
between steps. Delay time is set to 250
ms. (1/4 second) on the Remote
Commander.
If a Component Macro is not executed as
intended, check the programmed steps
and try adding a delay to execute the
programme properly.
1 While pressing the (light)
button, press the OTHER
button.
“SET MODE” appears as the screen
title.
2 Press the V/v buttons to
select “4 MACRO”, then press
the OK button or the centre
Label select button.
“MACRO” appears as the screen title.
Tip
If a number is displayed before the menu,
you can select the menu by pressing the
number button.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony RMVL1400T.CE7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony RMVL1400T.CE7 in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony RMVL1400T.CE7

Sony RMVL1400T.CE7 User Manual - German, Dutch, French, Italian - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info