67640

Sony RMVL1400T.CE7 Manual

14
Zoom out
Zoom in
Previous page
1/96
Next page
14
GB
If the Remote Commander
does not seem to be
working properly
If the learned button does not operate
properly, clear the learned signal first
(page 14), then perform the learning
procedure from step 1 again. (For
example, if the volume becomes very loud
after pressing the 2 (volume) + button
just once, noise may have interfered
during the learning procedure.)
For accurate learning
• Do not move the remote units during the
learning procedure.
• Be sure to press and hold the button of
the other remote control until you hear
the confirmation beep.
• Use fresh batteries in both remote
control units.
• Avoid learning in places under direct
sunlight or strong fluorescent light, or
near a plasma display. (It may cause
noise interference.)
• The remote control signal direction may
differ depending on the remote control.
If Learning does not work, try changing
the position of the remote control.
• When you programme the Remote
Commander from a remote control unit
with an interactive signal exchange
system (supplied with some Sony
receivers and amplifiers), the response
signal of the component may interfere
with the Learning of the Remote
Commander. In such a case, move to
another room, etc., where signals will
not interfere.
IMPORTANT
Be sure to place the Remote
Commander out of the reach of
small children or pets.
Also, set the Hold function to lock all the
buttons on the Remote Commander (page
11) when it is not used. Devices such as air
conditioners, heaters, electric appliances,
and electric shutters or curtains receiving an
infrared signal can be dangerous if misused.
Changing or clearing the
function of a “learned”
signal
To change the “learned” function, clear it
first and perform the learning procedure
again.
1 While pressing the (light)
button, press the OTHER
button.
“SET MODE” appears as the screen
title.
2 Press the V/v buttons to
select “2 LEARN”, then press
the OK button or the centre
Label select button.
“LEARN” appears as the screen title.
Tip
If a number is displayed before the menu,
you can select the menu by pressing the
number button.
3 Press the COMPONENT
select button or Label select
button you want to clear the
learned signal from.
The selected A/V component’s label
appears in the second line on the
screen.
4 While pressing the button on
the Remote Commander you
want to clear the learned
signal from, press the
(light) button.
A beep sounds and the cleared button
name and “OK” appear on the screen.
Tip
If you press again the button which you
cleared the learned signal from while
pressing the
(light) button, the label of
the button function and name will be
initialized.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony RMVL1400T.CE7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony RMVL1400T.CE7 in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony RMVL1400T.CE7

Sony RMVL1400T.CE7 User Manual - German, Dutch, French, Italian - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info