67640
13
Zoom out
Zoom in
Previous page
1/96
Next page
13
GB
Programming a signal on
the COMPONENT select
button
1 Perform steps 1-3 of the
learning procedure (page 12).
2 Press and hold the
COMPONENT select button
or Label select button on
which you want to programme
the signal.
The display turns off and the Remote
Commander enters into the Learning
mode.
3 Press and hold the button on
the other remote control until
you hear a beep.
A beep sounds and the learned button
name and “OK” appear in the third
line on the screen.
4 To programme signals on
other COMPONENT select
buttons or Label select button,
repeat steps 2 and 3.
5 Press the (light) button.
“LEARN” appears as the screen title.
6 Press the (light) button or
the RETURN button twice.
The set mode closes, and the Remote
Commander returns to standby for
operating the A/V components.
Notes
If you do not input anything into the Remote
Commander within 60 seconds between each
step, the setup procedure will be cancelled
and the set mode closes. Start over from the
beginning.
If you do not perform step 6 within 10
seconds after performing step 5, a beep
sounds twice and the selected button name
and “NG” appear in the third line on the
screen, then the display returns to the screen
shown in step 4. Start over from step 5.
If the Remote Commander learns signals
incorrectly in step 6, clear the learned signal
by pressing the
(light) button while
pressing the button on which the incorrect
signal was learned (page 14). Start over from
step 5.
If you programme remote signals on the TV
or amplifier’s volume control buttons using
the Learning function (page 12), those buttons
will also send the learned signal to control
components other than a TV or amplifier.
If you programme remote signals on the
volume control buttons of components other
than a TV or amplifier, those buttons will also
send the learned signal to control other A/V
components instead of controlling the TV or
amplifier’s volume.
•To avoid misoperation, the Remote
Commander will only transmit z/REC
(record) button signals if the button is pressed
and held for over 2 seconds. Therefore, if this
button is used for a learned operation, you
must press and hold it for over 2 seconds.
Continued
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony RMVL1400T.CE7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony RMVL1400T.CE7 in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony RMVL1400T.CE7

Sony RMVL1400T.CE7 User Manual - German, Dutch, French, Italian - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info