122744
24
Zoom out
Zoom in
Previous page
1/36
Next page
24
To clear programmed commands
1 Press and while holding SET, press and
hold for more than 3 seconds the
Component Select button you want to
clear.
Notes
•You can programme a Control Programme function
(Component Macro) for a Component Select button on
which the Power-On function (page 20) has been
programmed. In this case, the Power-On function is
executed when you press the Component Select button,
or when you select another component while the
consecutive Control Programme is being executed.
If the procedure is interrupted at any point for over 20
seconds, the setting mode ends and the series of
commands will be programmed up to that point. In this
case, clear the programme (page 24) and start again from
Step 1 to set the entire programme from the beginning.
You cannot continue programming once the setting mode
ends.
If a Component Select button has already “learned” a
remote control signal (page 12), you can programme a
Control Programme function (Component Macro), but
the function will not work until you clear the Leaning
function. To clear the Leaning function, see “Changing or
erasing the function of a “learned” button” on page 16.
While you are setting a programme, you can insert a 0.4
second interval before the next step is executed by
pressing the same Component Select button again. For
the example above in the Step 2, you can insert a 0.4
second interval between the TV-on signal and the TV/
VIDEO switching signal at the exercising as the
programme is executed by pressing the buttons
TVt1tTV.
Assigning Other Components to
the Component Select Buttons
You can assign another component to any of the
Component Select buttons not being used.
Once if you set a Component Select button to a
different type of component, the entered
component‘s code number becomes effective.
Notes
•To use the original component setting, set the component
code number again (page 8).
If you enter a new brand‘s component code number
without clearing the previous “learned” functions on that
Component Select button, the previously “learned”
functions remain effective. Erase the functions you do not
use frequently.
•You can only assign a TV to the TV Component Select
button.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony rm vl 600 t at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony rm vl 600 t in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony rm vl 600 t

Sony rm vl 600 t User Manual - German, Dutch, French - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info