122744
15
Zoom out
Zoom in
Previous page
1/36
Next page
15
Programming remote control signals to
the Component Select buttons and
System Control buttons
You can “teach” one operating procedure to a
Component Select button and System Control
buttons, so that when you press the Component
Select button and System Control buttons, the
operation is also automatically done.
For example, if it is necessary to switch the input
selection of an amplifier to DVD when you use a
DVD player, “teach” an input select signal to the
DVD button. After “learning,” the input selection of
an amplifier is automatically switched to DVD just
by pressing DVD. (For this operation, the amplifier
should first be turned on.)
Example: To “teach” the DVD input remote
control signal of your amplifier to the DVD
Component Select button of the Commander
1 Follow Steps 1 to 2 (page 12).
2 Press and hold the Component Select
button for the component whose signals
are to be “learned” for over 3 seconds.
DVD
To teach signals to the SYSTEM CONTROL
buttons, press and hold the desired SYSTEM
CONTROL button for over 3 seconds.
Both the SET indicator and the selected
Component Select button light up.
SET
SATDVDTV CBL
TAPE
CDVCR AMP
When you “teach” signals to the SYSTEM
CONTROL buttons, only the SET indicator
lights up.
When the SET indicator lights up, you can
release the Component Select button. The SET
indicator flashes and the selected Component
Select button lights up (Learning function
standby).
SET
SATDVDTV CBL
TAPE
CDVCR AMP
When you “teach” signals to the SYSTEM
CONTROL buttons, you can release the SYSTEM
CONTROL button when the SET indicator lights
up. The SET indicator lights up, but the SYSTEM
CONTROL button does not light up.
If another signal has already been
“learned” by that button
The SET indicator flashes twice, and the Commander
takes no action, returning to its state after SET was
pressed and held in Step 2. Either “teach” to another
free button, or clear the already “learned” function
(page 16) and start over from the beginning.
3 Press and hold the button on the other
remote control, until the SET indicator
lights and all the Component Select
buttons flash again.
During data transfer, only the SET indicator
stays lit, and the Component Select button turns
off.
If the SET indicator flashes five times
It means that “learning” is incomplete. Repeat Steps 2
and 3.
4 Repeat Steps 2 and 3 to “teach” remote
control signals to other buttons.
5 Press SET to finish “learning.”
Notes
• If you do not perform Learning steps within 20 seconds
at any point during the process, Learning mode ends.
• If you do not perform Step 3 within 10 seconds after Step
2, the Learning procedure returns to Step 1. Repeat from
Step 2 while the Component Select button is lit.
To cancel “learning,” press SET.
Continued
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony rm vl 600 t at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony rm vl 600 t in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony rm vl 600 t

Sony rm vl 600 t User Manual - German, Dutch, French - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info