23374
62
Zoom out
Zoom in
Previous page
1/115
Next page
62
4 Unplug the USB cable from the
computer or remove the disc from the
recorder.
If you use the recorder connected to the
computer, it is recommended that you insert a
fully charged rechargeable battery as a
precaution against power failures,
disconnection of the USB cable or other
unforeseen occurrences. We do not assure the
results should there be a mis-operation,
transfer failures, or destruction of audio data
caused by unforeseen occurrences.
If you disconnect the USB cable from the
recorder and want to reconnect it, make sure
to wait at least 2 seconds before connecting it
again.
Make sure to place the recorder at a stable,
vibration-free place during recording.
Make sure not to connect the recorder to your
computer during recording or playing.
Make sure to turn off any system suspend,
sleep, or hibernation function that may be
active on your computer. If the computer
changes to any of these modes while
connecting with the recorder, a malfunction
may occur; for example, the computer may
not recognize the recorder. If this happens,
reconnect the USB cable.
Make sure not to connect the recorder and the
computer through a USB hub.
When the recorder is connected to a computer,
power (bus power) is supplied to the recorder
through the computers USB port. If the
computer (a laptop PC, for example) is
operating on battery power, this connection
may cause the computers battery to drain. It
is thus recommended to use the computer with
an AC power adaptor.
We do not ensure trouble-free operation on all
computers that satisfy the system
requirements.
Storing non-audio data
to a disc
If you connect the recorder to a computer
with a disc in Hi-MD mode inserted, the
disc is recognized as storage media by the
computer, allowing you to store non-
audio data such as text data or image data.
For the storage space for each disc, refer
to the next page.
When you insert a disc in Hi-MD mode
into the recorder and make connection
with the computer, the recorder is
recognized as an external device and can
be viewed on the computer display. You
can use the recorder in the same way as
other devices.
z
You can view non-audio data stored on a disc in
the display window of the recorder. For details,
refer to “Viewing non-audio data stored on the
disc in the display window of the recorder (File
List)” (page 63).
When the SonicStage software is active, the
recorder is not recognized as a data storage
device.
To format a disc on the computer, follow the
instructions below.
—If you are using a Windows computer,
format the disc with the SonicStage
software.
—If you are using a Macintosh computer, you
cannot format a disc on the computer.
Format the disc on the recorder (page 55).
Make sure not to delete the file management
folder (HMDHIFI folder and HI-MD.IND
file) on the computer.
Notes
Notes
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony MZM10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony MZM10 in the language / languages: English as an attachment in your email.

The manual is 3,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info