23374
61
Zoom out
Zoom in
Previous page
1/115
Next page
61
Connecting the
recorder to your
computer
When you connect the supplied USB cable
directly to the USB connecting jack on the
recorder, power (bus power) is supplied
from the USB port of the computer. This
allows the recorder to be used without
power being supplied from the battery.
When using Windows ME or Windows 98SE
If you connect the recorder to the computer
with the disc mode on the recorder set to “Hi-
MD” (factory setting), and then insert a 60/74/
80-minute standard disc, the operation mode
of the disc may automatically change to Hi-
MD mode even if you do not record anything.
When you disconnect the USB cable, the
message “Unsafe Removal of Device” appears
in the computer display. This is not a problem.
Merely click “OK” to make the message
disappear.
1 Insert a recordable disc into the
recorder.
2 Make sure the recorder is stopped and
HOLD is released.
3 Open the cover of the USB
connecting jack on the recorder and
connect the supplied USB cable to the
recorder and to the computer.
4 Check the connections.
When the connections have been
properly made, “PC – – MD” appears
in the display.
When you unplug the USB
cable from the computer or
remove the disc from the
recorder
Be sure to remove the recorder or the disc
as follows. If not, damage to the data may
occur.
1 If you are using a Macintosh
computer, drag the ([NO NAME]
icon) on the desktop to the trash can.
If you are using a Windows computer,
skip this step.
2 Make sure that the “REC” indication
is not displayed in the display
window of the recorder.
3 Press x on the recorder.
“EJECT DISC OK” appears in the
display.
Depending on the conditions, it may
take some time until “EJECT DISC
OK” appears in the display.
Note
Computer
To the USB cable
connecting jack
USB cable
(supplied)
To the USB port
Make sure to
open the cover.
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony MZM10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony MZM10 in the language / languages: English as an attachment in your email.

The manual is 3,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info