371866
25
Zoom out
Zoom in
Previous page
1/108
Next page
Additional Information
25
GB
Symptom Cause and remedy
The DOLBY PRO
LOGIC II indicator
does not turn on
The DOLBY PRO
LOGIC II indicator
turn on
The DTS indicator
does not turn on
MPEG-2 AAC
indicator does not
light up.
The batteries
cannot be
charged
The CHG indicator
does not turn off.
Infrared signal
emission does not
stop (when the
INPUT SELECT
switch on the
processor is set
to “ANALOG”)
No signal from
optical digital
output
Bilingual sound
cannot be selected
when using digital
input. (Both MAIN
and SUB can be
heard at the same
time.)
, The EFFECT switch on the processor is set to “OFF.”
, Analogue input signal, digital input PCM signal, Dolby Digital 2-channel
signal or MPEG-2 AAC 2-channel signal is not input.
, The EFFECT switch on the processor is set to “CINEMA” or “MUSIC” mode.
, Analogue input signal, digital input PCM signal, Dolby Digital 2-channel
signal or MPEG-2 AAC 2-channel signal is input.
, The DTS digital output setting on the DVD player (including game machines)
is set to “OFF.”
See the instruction manual of your DVD player, and change the DTS digital
output setting to “ON.”
, Playback signals are not recorded in DTS format.
, The audio for the chapter being played is not a DTS signal.
, The DVD player does not support DTS format.
Use a DVD player that supports DTS.
, Playback signals are not recorded in MPEG-2 AAC format.
, Check if the CHG indicator turns on. If not, put the headphones on the
processor correctly so that the CHG indicator turns on.
, Dry batteries are installed.
Insert the supplied rechargeable nickel-metal hydride batteries.
, Rechargeable batteries other than the supplied are installed.
Insert the supplied rechargeable nickel-metal hydride batteries.
, The CHG indicator remains lit during charging (approx. 16 hours) by the
built-in timer after the headphone is placed on the processor.
, Signal noise is output from the connected analogue component.
Unplug the connected analogue component, or set the INPUT SELECT
switch on the processor to "DIGITAL," and make sure playback of the
component connected to the DIGITAL IN jack is stopped.
, No power supplied to the processor.
Connect the processor to a power source.
, No playback sound from the connected external digital unit at the optical
input jack.
Check the external unit is playing back.
, Connect the analogue out to the LINE IN jack, and select the sound on the
connected component.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony mdr-ds4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony mdr-ds4000 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony mdr-ds4000

Sony mdr-ds4000 User Manual - German, Dutch, Italian, Portuguese - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info