371866
24
Zoom out
Zoom in
Previous page
1/108
Next page
Additional Information
24
GB
Symptom Cause and remedy
Distorted or
intermittent sound
(sometimes with
noise)
Low sound
Loud background
noise
The sound cuts off
The surround
sound effect is
not obtained
The DOLBY
DIGITAL indicator
does not turn on
, The headphones’ POWER indicator light dims, flashes, goes off, or the sound
becomes distorted or intermittent.
Charge the rechargeable batteries if they are weak, or replace alkaline
batteries with new ones. If the POWER indicator is still off after charging the
batteries, take the headphones to a Sony dealer.
, Check if there is any obstruction between the processor and the headphones.
, Check that the infrared sensors are not covered with your hands or hair.
, If you use the headphones by a window where the sunlight is too strong, draw
the curtains/blinds to shut out the direct sunlight, or use the headphones
away from the sunlight.
, Change the position or angle of the processor.
, When analogue input is selected, change the ATT switch on the processor to
"–8dB."
, If you connect the processor to an AV component using the headphone jacks,
lower the volume level on the connected AV component.
, When using DTS audio sources, set the EFFECT switch on the processor to
“CINEMA” or “MUSIC” mode (page 17, 18).
, When analogue input is selected, change the ATT switch on the processor to
"0dB."
, If you connect the processor to an AV component using the headphone jacks,
raise the volume level on the connected AV component.
, Raise the headphone volume.
, If you connect the processor to an AV component using the headphone jacks,
raise the volume level on the connected AV component.
, The headphones’ POWER indicator light dims, flashes, goes off, or the sound
becomes distorted or intermittent.
Charge the rechargeable batteries if they are weak, or replace alkaline
batteries with new ones. If the POWER indicator is still off after charging the
batteries, take the headphones to a Sony dealer.
, If a plasma display is placed nearby, place the system farther away from it.
, The processor stops sending signals, if 10 minutes passes and no signal has
been input.
Set the ATT switch on the processor to “0dB.”
If you connect the processor to an AV component using the headphone
jacks, raise the volume level on the connected AV component.
, Set the EFFECT switch on the processor to “CINEMA” or “MUSIC” mode
(page 17,18).
, The audio being played is not a multichannel signal.
The surround effect does not work for monaural sound sources.
, The digital audio output setting for the DVD player (including game
machines) may be set to “PCM.”
See the instruction manual of your DVD player, and change the setting
(such as “Dolby Digital/PCM” or “Dolby Digital”) for usage with
components having built-in Dolby Digital decoders.
, Playback signals are not recorded in Dolby Digital format.
, The audio for the chapter being played is not a Dolby Digital signal.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony mdr-ds4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony mdr-ds4000 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony mdr-ds4000

Sony mdr-ds4000 User Manual - German, Dutch, Italian, Portuguese - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info