51692
12
Zoom out
Zoom in
Previous page
1/40
Next page
12
This monitor complies with the DDC
TM
1, DDC2B and
DDC2AB which are the Display Data Channel (DDC)
standards of VESA.
When a DDC1 host system is connected, the monitor
synchronizes with the V. CLK in accordance with the VESA
standards and outputs the EDID (Extended Display
Identification) to the data line.
When a DDC2B or DDC2AB host system is connected, the
monitor automatically switches to each communication.
DDC
TM
is a trademark of Video Electronics Standard
Association.
This monitor is capable of 3 states of reduced power
consumption.
By sensing the absence of one or both sync signals coming
from the host computer, it will reduce power consumption
as follows.
State
Normal
operation
Standby
(1st step
of power
saving)
Suspend
(2nd step
of power
saving)
Active-off
(3rd step
of power
saving)
Power-off
Power
consumption
140 W
100 W
15 W
5 W
0 W
Required
resumption
time
approx.
3 sec.
approx.
3 sec.
approx.
10 sec.
u (power)
indicator
green on
green on
green on
off
off
POWER
SAVING
indicator
off
orange on
orange on
orange on
off
1
2
3
4
5
Power Saving Operation
The H-sync is not present.
The unit goes into standby state.
The V-sync is not present.
The unit goes into suspend state.
Both the H-sync and V-sync are not present.
The unit goes into active-off state.
The monitor requires a videocard or screen saver software
which switches off one or both sync signals to activate the
power saving function.
Caution: The Power Saving function will automatically put
the monitor into the Active-off state if the power
switch is turned on without any video signal
input. Once the horizontal and vertical syncs are
sensed, the monitor will automatically return to
its Normal operation state.
.
.
.
Mode
Plug and Play
Power Saving
Function
Use of the Tilt-Swivel
With the tilt-swivel, this unit can be adjusted to be viewed
at your desired angle within 90° horizontally and 20°
vertically.
To turn the unit vertically and horizontally, hold it at its
bottom with both hands as illustrated below.
Damper Wire
Using a white background, very thin horizontal stripes on
the screen are visible as shown below. These stripes are
damper wires. These wires are attached to the aperture
grille inside the Trinitron tube and are there to damp
vibrations of the aperture grille in order to prevent them
from influencing to the picture quality.
Damper wire
GDM-17SE2T:
Approx. 6 cm
GDM-20SE2T:
Approx. 8 cm
GDM-17SE2T:
Approx. 6 cm
GDM-20SE2T:
Approx. 8 cm
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony GDM-17SE2T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony GDM-17SE2T in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info