51692
11
Zoom out
Zoom in
Previous page
1/40
Next page
11
EN
Locking the Controls
This feature allows you to lock the monitor so that all the
buttons, except the u power switch and OPTION button, on
the front panel cannot be operated (Lock mode). Hence,
your settings cannot be modified. With this function, you
can ensure that your settings will remain the same even
when the control buttons are exposed to others.
To release the Lock mode, set it to off (UNLOCK) position.
Normally keep this function set to off (UNLOCK) position.
1 Press the OPTION button.
The OPTION OSD (On Screen Display) appears.
2 Press the ¨./> buttons to select “LOCK” and then
press the >?// buttons to select “LOCK.”
The ¨ ./> buttons do not work on the OPTION OSD.
The control buttons on the front panel except the OPTION
button do not work. If you press any button except the
u power switch and OPTION button, the
mark
appears on the screen.
To Cancel the Control Lock
Press the OPTION button again.
Press the > ?// buttons to select “UNLOCK.”
To erase the OPTION OSD, press the OPTION button again.
The OSD automatically disappears 30 seconds after you
release the buttons.
/
OPTION
COLOR TEMPERATURE
INPUT:
LOCK:
SETSELECT
HD15 BNC
UNLOCK LOCK
80.0KHz/ 75Hz
Checking the Signal Frequency
It is possible to check the current vertical and horizontal
frequencies of the input signal received.
Press the OPTION button.
The OPTION OSD (On Screen Display) appears.
OPTION
COLOR TEMPERATURE
INPUT:
LOCK:
SETSELECT
HD15 BNC
UNLOCK LOCK
80.0KHz/ 75Hz
Vertical
frequency
Horizontal
frequency
Resetting the Adjustment
Data to Factory-preset Levels
To reset an adjustment item
If you want to reset the color temperature
Select one of the three color temperature modes, (See
“Setting the Color Temperature” on the page 9), and then
press the RESET button before the OSD (On Screen Display)
disappears.
If you want to reset the other adjustment items
Press the button of the adjustment item you want to reset,
and then press the RESET button before the OSD (On
Screen Display) disappears.
To reset the brightness, contrast, size,
center and pincushion adjustment data at
once (for the received signal)
Press the RESET button with something like a coin for one
second when no OSD is shown.
To reset all adjustment data to factory-
preset levels
Press and hold the RESET button for more than 2 seconds.
All adjustment data including the brightness and contrast
are reset to factory-preset levels.
RESET
RESET
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony GDM-17SE2T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony GDM-17SE2T in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info