291200
118
Zoom out
Zoom in
Previous page
1/192
Next page
118
To change the insert end point
Press ZERO SET MEMORY again after step 5 to
erase the ZERO SET MEMORY indicator and
begin from step 3.
Note
The picture and sound recorded on the section
between the insert start and end points will be
erased when you insert the new scene.
If you insert scenes on the tape recorded with
other camcorder (including other DCR-PC8E)
The picture and sound may be distorted. We
recommend that you insert scenes on a tape
recorded with your camcorder.
When the inserted picture is played back
The picture and sound may be distorted at the
end of the inserted section. This is not a
malfunction.
The picture and sound at the start point and the
end point may be distorted in the LP mode.
To insert a scene without setting the insert
end point
Skip step 3 and 4. Press x when you want to stop
inserting.
If you press FN
The ZERO SET MEMORY indicator is not
displayed.
FN
5,6
4
ZERO SET
MEMORY
0:00:00
ZERO SET
MEMORY
REC
PAUSE
REC
START
REC CTRL
RET.
Inserting a scene from a VCR
Insert Editing
Aanpassen van het eindpunt van de
nieuwe opnamen
Druk na stap 5 nogmaals op de ZERO SET
MEMORY toets zodat de ZERO SET MEMORY
aanduiding verdwijnt en herhaal dan de
procedure vanaf stap 3.
Opmerking
Het eerder opgenomen beeld en geluid tussen
het montage-beginpunt en het montage-eindpunt
zullen bij het inlassen van nieuwe beelden gewist
worden.
Als u beelden inlast op een cassette die is
opgenomen met een andere camcorder
(inclusief een andere DCR-PC8E)
Dan kunnen beelden en geluid ietwat vervormd
worden. Het is aanbevolen alleen beelden in te
lassen op een cassette die is opgenomen met deze
zelfde camcorder.
Bij weergave van de nieuw ingelaste beelden
In de laatste beelden en het geluid van het
ingevoegde gedeelte kan bij weergave wat
vervorming optreden. Dit duidt niet op storing in
de werking.
In de beelden en het geluid bij het beginpunt en
het eindpunt kan ietwat vervorming optreden bij
de LP weergavesnelheid.
Inlassen van beelden zonder eerst het
eindpunt vast te leggen
Sla de stappen 3 en 4 over. Druk op de x
stoptoets wanneer u wilt stoppen met inlassen.
Bij indrukken van de FN toets
De ZERO SET MEMORY aanduiding wordt
dan niet aangegeven.
Inlassen van beelden vanaf een
videorecorder Inlasmontage
118


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony dcr-pc 8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony dcr-pc 8 in the language / languages: English, Dutch as an attachment in your email.

The manual is 3,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info