291200
117
Zoom out
Zoom in
Previous page
1/192
Next page
Editing Videomontage
117
You can insert a new scene from a VCR onto
your originally recorded tape by specifying the
insert start and end points. Use the Remote
Commander for this operation. Connections are
the same as on page 113 or 115.
Insert a cassette containing the desired scene to
insert into the VCR.
[A]: A tape that contains the scene to be
superimposed
[B]: A tape before editing
[C]: A tape after editing
(1) Set the POWER switch to VCR.
(2) On the VCR, locate just before the insert start
point [a], then set the VCR to the playback
pause mode.
(3) On your camcorder, locate the insert end
point [c] by pressing m or M. Then set it
to the playback pause mode.
(4) Press ZERO SET MEMORY on the Remote
Commander. The ZERO SET MEMORY
indicator flashes and the end point of the
insert is stored in memory.
(5) On your camcorder, locate the insert start
point [b] by pressing m. Press FN and select
REC CTRL in PAGE3. Press REC PAUSE.
(6) First press X on the VCR, and after a few
seconds press REC START on your camcorder
to start inserting the new scene.
Inserting automatically stops near the zero
point on the tape counter. Your camcorder
automatically returns to the recording stop
mode.
Op een videocassette die reeds opnamen bevat kunt
u nieuw beeldmateriaal vanaf een videorecorder
inlassen door het gewenste opname-beginpunt en
opname-eindpunt in te voeren.
Gebruik hiervoor de afstandsbediening. De
aansluitingen zijn dezelfde als gemaakt op blz. 113
of 115.
Plaats de videocassette met de in te lassen beelden in
de weergave-videorecorder.
[A]: De band met de in te lassen nieuwe beelden
[B]: Uw te monteren videoband vóór het inlassen
[C]: De uiteindelijke videoproductie na
inlasmontage
(1) Zet de POWER schakelaar van uw camcorder in
de VCR stand.
(2) Zoek op de aangesloten videorecorder het
beginpunt [a] op waarvandaan u de opnamen
wilt overnemen en zet de videorecorder iets vóór
dat punt met de X pauzetoets in de weergave-
pauzestand.
(3) Zoek op de cassette in uw camcorder met de m
of M snelspoeltoets het montage-eindpunt [c]
op, tot waar u de nieuwe opnamen wilt
inmonteren. Druk daar op de X pauzetoets om
ook de camcorder in de weergave-pauzestand te
zetten.
(4) Druk op de ZERO SET MEMORY toets van de
afstandsbediening. De aanduiding ZERO SET
MEMORY knippert en het eindpunt voor het
inlassen wordt in het geheugen vastgelegd.
(5) Ga bij de camcorder met de m terugspoeltoets
terug naar het montage-beginpunt [b] waar u de
nieuwe opnamen wilt inlassen. Druk daar op de
FN toets en stel in op de REC CTRL toets op het
PAGE3 bedieningsscherm. Druk op de REC
PAUSE toets.
(6) Druk nu eerst op de X pauzetoets van de
videorecorder en na enkele seconden ook op de
REC START toets van uw camcorder om het
inlassen van de nieuwe opnamen te starten.
Het inlassen van de nieuwe videobeelden
begint, om automatisch te stoppen wanneer de
bandteller het nulpunt bereikt. Uw camcorder
keert dan automatisch terug in de
opnamestopstand.
Inlassen van beelden
vanaf een videorecorder
Inlasmontage
Inserting a scene from
a VCR Insert Editing
[a]
[b]
[c]
[A]
[B]
[C]
117


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony dcr-pc 8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony dcr-pc 8 in the language / languages: English, Dutch as an attachment in your email.

The manual is 3,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info