107344
54
Zoom out
Zoom in
Previous page
1/76
Next page
54
Noises appear and is displayed
on the screen.
The tape was recorded in a TV color system
other than that of your camcorder (PAL).
This is not a malfunction (p. 57).
is displayed on the screen.
The tape you are playing was recorded on
another device with a 4ch microphone
(4CH MIC REC). Your camcorder is not
compatible with 4ch microphone recording.
Pictures output from the camcorder
do not appear on the screen of the
connected device. (DCR-HC45E)
When attaching the camcorder to the
Handycam Station, close the DC IN jack
cover on the camcorder, and then fully
insert the camcorder into the Handycam
Station in the correct way securely (p. 9).
Time code and other information
appear on the display of the
connected device.
Set [DISP OUT] to [LCD] while connected
with an A/V connecting cable (p. 40).
You cannot dub correctly using the
A/V connecting cable.
• The A/V connecting cable is not connected
properly. Make sure that the A/V
connecting cable is connected to the input
jack of another device for dubbing a picture
from your camcorder (p. 41).
New sound added to a recorded tape
is not heard.
Adjust [AUDIO MIX] until the sound is
heard appropriately (p. 33).
Pictures from connected devices are
not displayed correctly.
The input signal is not PAL (p. 57).
The picture gets disturbed or dark,
or the sounds get distorted. (DCR-
HC45E)
• A/V connecting cables are connected to
both your camcorder and the Handycam
Station. Disconnect one of the A/V
connecting cables.
The computer does not recognize
your camcorder.
Install the “Picture Motion Browser”
(p. 47).
The computer may not recognize your
camcorder for a few moments after you
connect it. Wait for a while.
For DCR-HC45E:
Insert you camcorder into the Handycam
Station correctly (p. 9).
Disconnect USB devices other than the
keyboard, the mouse, and the camcorder
from the (USB) jack on the computer.
Disconnect the cable from the computer
and camcorder, restart the computer, then
connect them again correctly.
You cannot install the supplied
software, “Picture Motion Browser,”
on a Macintosh computer.
You can install “Picture Motion Browser”
only on a Windows computer.
Dubbing/Editing/Connecting to
other devices
Connecting to a computer
Troubleshooting (Continued)
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DCR-HC37E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DCR-HC37E in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony DCR-HC37E

Sony DCR-HC37E User Manual - German - 80 pages

Sony DCR-HC37E User Manual - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info