107344
52
Zoom out
Zoom in
Previous page
1/76
Next page
52
The picture in the viewfinder has
disappeared.
Close the LCD panel. The picture is not
displayed in the viewfinder when the LCD
panel is open (p. 13).
Dots in lines appear on the LCD
screen.
This is not a malfunction. These dots are
not recorded.
The cassette cannot be ejected from
the compartment.
Make sure the power source (battery pack
or AC Adaptor) is connected correctly
(p. 8).
Moisture condensation has occurred inside
the camcorder (p. 61).
The Cassette Memory indicator or
title display does not appear while
using a cassette with Cassette
Memory.
This camcorder does not support Cassette
Memory, so the indicator does not appear.
The remaining tape indicator is not
displayed.
Set [ REMAIN] to [ON] to always
display the remaining tape indicator (p. 39).
The cassette is noisier during
rewinding or fast-forwarding.
When using the AC Adaptor, rewind/fast
forward speed increases (compared with
battery operation) and therefore increases
noise. This is not a malfunction.
The tape does not start when you
press REC START/STOP.
Slide the POWER switch repeatedly to turn
on the CAMERA lamp (p. 17).
The tape has reached the end. Rewind it, or
insert a new cassette.
Set the write-protect tab to REC or insert a
new cassette (p. 58).
The tape is stuck to the drum due to
moisture condensation. Remove the
cassette and leave your camcorder for at
least 1 hour, then re-insert the cassette
(p. 61).
You cannot record a smooth
transition on a tape from the last
recorded scene to the next.
Perform [END SCH] (p. 22).
Do not remove the cassette. (The picture
will be recorded continuously without a
break even when you turn the power off.)
Do not record pictures in SP mode and LP
mode on the same tape.
Avoid stopping then recording a movie in
the LP mode.
[END SCH] does not work.
Do not eject the cassette after recording
(p. 22).
There is nothing recorded on the cassette.
There is a blank section between recorded
sections of the tape. This is not a
malfunction.
The auto focus does not function.
• Set [FOCUS] to [AUTO] (p. 27).
The recording conditions are not suitable
for auto focus. Adjust the focus manually
(p. 27).
[STEADYSHOT] does not function.
• Set [STEADYSHOT] to [ON] (p. 36).
Cassette tapes
Recording
Troubleshooting (Continued)
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DCR-HC37E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DCR-HC37E in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony DCR-HC37E

Sony DCR-HC37E User Manual - German - 80 pages

Sony DCR-HC37E User Manual - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info