62206
103
Zoom out
Zoom in
Previous page
1/139
Next page
103
Troubleshooting
The CHG (charge) lamp does not
light while the battery pack is being
charged.
Turn the POWER switch to OFF (CHG)
(p. 20).
Attach the battery pack to the camcorder
correctly (p. 20).
Connect the power cord (mains lead) to the
wall outlet (wall socket) properly.
The battery charge is completed (p. 20).
The CHG (charge) lamp flashes while
the battery pack is being charged.
Attach the battery pack to the camcorder
correctly (p. 20). If the problem persists,
disconnect the AC Adaptor from the wall
outlet (wall socket) and contact your Sony
dealer. The battery pack may be damaged.
The remaining battery time indicator
does not indicate the correct time.
The ambient temperature is too high or too
low. This is not a malfunction.
The battery pack has not been charged
enough. Fully charge the battery pack again.
If the problem persists, replace the battery
pack with a new one (p. 20).
The indicated time may not be correct
depending on the environment of use.
The battery pack is quickly
discharged.
The ambient temperature is too high or low.
This is not a malfunction.
The battery pack has not been charged
enough. Fully charge the battery pack again.
If the problem persists, replace the battery
pack with a new one (p. 20).
Menu items are grayed out.
You cannot select grayed items in the current
recording/playback situation.
There are some functions you cannot activate
simultaneously (p. 109).
The buttons do not appear on the
touch panel.
Touch the LCD screen lightly.
Press DISP/BATT INFO on your camcorder,
or DISPLAY on the Remote Commander
(DCR-DVD310E/DVD410E/DVD710E/
DVD810E) (p. 26, 132).
The buttons on the touch panel do
not work correctly or do not work at
all.
Adjust the touch panel ([CALIBRATION],
p. 122).
The image in the viewfinder is not
clear.
Pull out the viewfinder, then move the
viewfinder lens adjustment lever until the
image appears clearly (p. 26).
The image in the viewfinder has
disappeared.
Close the LCD panel. No image is displayed
in the viewfinder when the LCD panel is
open (p. 26).
The disc cannot be removed.
Make sure the power source (battery pack or
AC Adaptor) is connected correctly (p. 20).
The disc is damaged or is dirty with
fingerprints, etc. In this case, it may take up
to 10 minutes to remove the disc.
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
You turned off your camcorder during
finalizing the disc. Turn on your camcorder
and complete finalizing the disc (p. 67).
LCD screen/Viewfinder
Media
Continued ,
103


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DCR-DVD410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DCR-DVD410 in the language / languages: English as an attachment in your email.

The manual is 9,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony DCR-DVD410

Sony DCR-DVD410 User Manual - German, Dutch - 283 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info