62206
102
Zoom out
Zoom in
Previous page
1/139
Next page
102
Troubleshooting (Continued)
Even if you press EASY, menu
settings do not switch to their
defaults automatically.
Following menu settings remain as they were
set even during Easy Handycam operation
(p. 34).
[MOVIE MEDIA SET]
[PHOTO MEDIA SET]*
1
[AUDIO MODE]*
2
[WIDE SELECT]
[SUB-T DATE]
[ INDEX SET]
[ IMAGE SIZE]
[FILE NO.]
[FLASH MODE]*
3
[ DISPLAY]
[VOLUME]
[BEEP]
[TV TYPE]
[CLOCK SET]
[AREA SET]
[SUMMERTIME]
[ LANGUAGE SET]
[DEMO MODE]
Your camcorder vibrates.
Vibration occurs depending on the condition
of the disc. This is not a malfunction.
A vibration is felt in your hand or a
faint sound is heard during
operation.
This is not a malfunction.
A motor sound is heard in the
camcorder when the disc cover is
closed without a disc.
Your camcorder is trying to recognize the
disc. This is not a malfunction.
Your camcorder gets warm.
This is because the power has been turned on
for a long time. This is not a malfunction.
Turn off your camcorder and leave it for a
while in a cool place.
The supplied Remote Commander
does not function (DCR-DVD310E/
DVD410E/DVD710E/DVD810E).
Set [REMOTE CTRL] to [ON] (p. 89).
Insert a battery into the battery case with the
+/– polarities correctly matching the +/–
marks (p. 132).
Remove any obstructions between the
Remote Commander and the remote sensor.
Point the remote sensor away from strong
light sources such as direct sunlight or
overhead lighting. Otherwise, the Remote
Commander may not function properly.
Another DVD device malfunctions
when you use the supplied Remote
Commander (DCR-DVD310E/
DVD410E/DVD710E/DVD810E).
Select a commander mode other than DVD 2
for your DVD device, or cover the sensor of
your DVD device with black paper.
The power abruptly turns off.
When approximately 5 minutes have elapsed
while you do not operate your camcorder, the
camcorder is automatically turned off
(A.SHUT OFF). Change the setting of
[A.SHUT OFF] (p. 89), or turn on the power
again, or use the AC Adaptor.
If the time set with [QUICK ON STBY]
(p. 89) has elapsed in sleep mode, your
camcorder turns off automatically. Turn on
your camcorder again.
Charge the battery pack (p. 20).
*
1
DCR-DVD410E/DVD810E
*
2
DCR-DVD115E/DVD310E/DVD410E/
DVD710E/DVD810E
*
3
DCR-DVD310E/DVD410E/DVD710E/
DVD810E
Batteries/Power sources
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony DCR-DVD410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony DCR-DVD410 in the language / languages: English as an attachment in your email.

The manual is 9,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony DCR-DVD410

Sony DCR-DVD410 User Manual - German, Dutch - 283 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info