50003
63
Zoom out
Zoom in
Previous page
1/112
Next page
62
When marking during recording or
playback
Press INDEX MARK on the Remote Commander
at the point you want to locate later.
Locating the marking position
Обнаружение положения
отметки
Отметка при записи или
воспроизведении
Нажать на кнопку INDEX MARK (Отметка
индекса) на пульте дистанционного
управления в положении, которое Вы хотите
обнаружить позже.
Примечания по отметке
Надо помнить, что индексные сигналы могут
быть отмечены с интервалом в более двух
минут. В противном случае, не выполняется
поиск их правильно.
Если Вы прекратите запись во время
отметки индексного сигнала [индикация
INDEX MARK (Отметка индекса) появится в
видоискателе], то поиск, может быть, не
выполняется правильно.
Если Вы отметите индексный сигнал на
ленте, на которую записан код данных, код
данных или код времени RC, будет
стираться в положениии отметки
индексного сигнала. При воспроизведении
данной ленты видеокамера показывает код
данных, находящийся прямо перед стертым.
Черная полоска появится, когда Вы
отмечаете индексный сигнал при
воспроизведении, при этом звук не
слышится. Это не влияет на уже записанное
изображение и звук.
Невозможно отметить индексный сигнал на
ленте с выявленной красной отметкой на
кассете.
Невозможно отметить индексный сигнал на
записанной ленте по системе NTSC.
Невозможно отметить индексный сигнал
когда вы пользуетесь 5 SEC (5 сек), ANTI
GROUND SHOOTING или выведение
изображения производится при
установленном выключателе POWER
(Питание) в положении CAMERA
(видеокамера).
INDEX
MARK
MARK ERASE
INDEX
Notes on marking
Make sure you mark index signals at more than
two-minute intervals. Otherwise, you may not
be able to search for them correctly.
If you stop recording while the index signal is
being marked (the INDEX MARK indicator
lights in the viewfinder), the search may not be
completed correctly.
If you mark an index signal on the tape with the
Data Code or RC time code recorded, the Data
Code will be erased at the point on which the
index signal is marked. When playing back this
tape, the camcorder keeps displaying the Data
Code immediately before the erased one.
A black band appears when you mark index
signal during playback, and the sound cannot
be heard. This does not affect the picture and
sound that are already recorded.
You cannot mark an index signal on a tape with
the red mark on the cassette exposed.
You cannot mark an index signal on an NTSC-
recorded tape.
You cannot mark an index signal when you are
using 5 SEC, ANTI GROUND SHOOTING
or fading out while the POWER switch is set to
CAMERA.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony CCD-TR820E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony CCD-TR820E in the language / languages: English as an attachment in your email.

The manual is 2,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony CCD-TR820E

Sony CCD-TR820E User Manual - German - 112 pages

Sony CCD-TR820E User Manual - Dutch, French - 112 pages

Sony CCD-TR820E User Manual - Italian - 112 pages

Sony CCD-TR820E User Manual - Portuguese, Spanish - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info