50003
61
Zoom out
Zoom in
Previous page
1/112
Next page
60
Returning to a pre-
registered position
—CCD-TR825E only
Using the Remote Commander, you can easily go
back to the desired point on a tape after
playback. Use the tape counter. If the RC time
code appears in the viewfinder, set COUNTER to
NORMAL in the menu system to display the tape
counter.
(1)During playback, press COUNTER RESET at
the point you later want to locate. The counter
shows “0:00:00” in the viewfinder.
(2)Press p when you want to stop playback.
(3)Press ZERO MEM on the Remote
Commander. The ZERO MEM indicator
flashes in the viewfinder.
(4)Press 0 to rewind or press ) to fast-
forward the tape to the counter’s zero point.
The tape stops automatically when the
counter reaches approximately zero.
Возврат к предварительно
зарегистрированному
положению
– Только модель CCD-TR825E
С пульта дистанционного управления Вы
можете без труда перемотать ленту назад до
требуемого фрагмента видеозаписи после
воспроизведения. Для этого пользовать
счетчик длины ленты. Если временной код
RC появится в видоискателе, установить
COUNTER (Счетчик) в положение NORMAL
(Норм.) в системе меню для показания
счетчика длины ленты.
(1) В режиме воспроизведения нажать на
кнопку COUNTER RESET (Сброс счетчика)
в положении, которое вы хотите
обнаружить позже. Счетчик покажет
“0:00:00” в видоискателе.
(2) Нажать на кнопку p тогда, когда вы
хотите остановить воспроизведение.
(3) Нажать на кнопку ZERO MEM (Нет
памяти) на пульте дистанционного
управления. Индикация ZERO MEM мигает
в видоискателе.
(4) Нажать на кнопку 0 для перемотки
назад или на кнопку ) для ускоренной
перемотки вперед до нулевого положения
счетчика. Лента останавливается
автоматически, когда счетчик доходит
приблизительно до нуля.
Примечания по счетчику длины ленты
Что-то должно быть записано на ленте для
функционирования счетчика. Данный
счетчик не работает на незаписанной
ленте.
Бывает расхождение с фактическим
временем в несколька секунд.
REW
COUNTER
RESET
0:00:00
31
4
2
0:12:34
ZERO MEM
STOP
ZERO MEM
Notes on the tape counter
Something must be recorded on the tape in
order for the tape counter to function. Tape
counter does not work on a blank tape.
There may be a discrepancy of several seconds
from the actual time.
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony CCD-TR820E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony CCD-TR820E in the language / languages: English as an attachment in your email.

The manual is 2,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony CCD-TR820E

Sony CCD-TR820E User Manual - German - 112 pages

Sony CCD-TR820E User Manual - Dutch, French - 112 pages

Sony CCD-TR820E User Manual - Italian - 112 pages

Sony CCD-TR820E User Manual - Portuguese, Spanish - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info