49839
90
Zoom out
Zoom in
Previous page
1/132
Next page
90
To write the RC time code from the
end of the RC time code recorded
portion
Rewind the tape to the portion on which the RC
time code has been written and set the camcorder
to playback pause mode. Then follow steps 3 and
4 above. The RC time code is written
continuously.
Notes on writing the RC time code
The RC time code writing stops when:
you press TIME CODE WRITE again before
starting playback.
you press INDEX before starting playback.
you change from playback mode to another
mode.
When you are writing the RC time code from
the middle of a tape without the time code
written, writing starts several frames before the
current picture.
If you write the RC time code on a recorded
tape, the Data Code is erased.
You cannot write the RC time code on the tape
that is recorded in LP mode. Though you can
write the RC time code on a tape recorded both
in LP mode and SP mode, the RC time code
written in LP mode, however, may not be read
correctly.
You cannot write the RC time code on an
NTSC-recorded tape.
While the RC time code is being erased, the
sound cannot be heard and a black band
appears at the bottom of the picture. This will
not affect the recorded sound or picture.
Note on --:--:--:-- indicator
The --:--:--:-- indicator appears during playback
if:
nothing is recorded.
the RC time code is unreadable because of the
damage of the tape or because of the noise.
you recorded using another VCR without RC
time code function.
you erase the index signal or make PCM after
recording on another VCR in the portion on
which the RC time code is written.
In this case, we recommend you to rewrite the
RC time code.
Для записи временного кода RC от
конца записанной части с временным
кодом RC
Перемотайте ленту назад до части, на
которой был записан временной код RC, и
установите видеокамеру на режим паузы
воспроизведения. Затем следуйте
вышеописанным пунктам 3 и 4. Временной
код RC будет записан без перерыва.
Примечания к записи временного кода RC
Запись временного кода RC отменяется,
когда:
Вы нажимаете TIME CODE WRITE снова
до начала воспроизведения.
Вы нажимаете INDEX до начала
воспроизведения.
Вы изменяете режим воспроизведения на
другой режим.
Если Вы записываете временной код RC с
середины ленты, на которой не записан
временной код RC, запись временного кода
начнется на несколько кадров раньше
текущего изображения.
Если Вы записываете временной код RC на
записанную ленту, то код данных стирается.
Вы не можете записать временной код RC
на ленту, записанную в режиме LP.
Несмотря на то, что Вы можете записать
временной код RC на ленту, записанную и в
режиме LP и в режиме SP, временной код
RC, записанный в режиме LP, все равно не
может быть считан правильно.
Вы не можеет записать временной код RC
на ленте, записанной в системе NTSC.
Во время стирания временного кода RC
звук прослушиваться не может, и черная
полоса появляется внизу изображения. Это
не будет влиять на записанные звук или
воспроизведение.
Примечание к индикатору --:--:--:--
Индикатор --:--:--:-- появляется во время
воспроизведения, если:
ничего не записано.
временной код RC не считывается из-за
повреждения ленты или из-за помех.
Вы произвели запись с использованием
другого КВМ без функции временного кода
RC.
Вы стираете индексный сигнал или
выполняете РСМ после записи на другом
КВМ в части, на которой был записан
временной код RC.
В таком случае мы рекомендуем Вам
перезаписать временной код RC.
Writing the RC Time code on a
recorded tape
Запись временного кода RC на
записанной ленте
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony CCD-TR3400E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony CCD-TR3400E in the language / languages: English as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony CCD-TR3400E

Sony CCD-TR3400E User Manual - German, French - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info