49839
88
Zoom out
Zoom in
Previous page
1/132
Next page
88
Erasing an index signal
(1)Locate the index signal to be erased using the
index scan or index search function.
(2)Press INDEX ERASE on the Remote
Commander within 2 to 10 seconds while the
desired programme plays back. After the
index signal is erased, the camcorder returns
to index scan or index search mode,
whichever was used in step 1.
Notes on erasing
Press INDEX ERASE more than 2 seconds after
the playback of the desired programme begins.
You cannot erase the index signal on a tape
with the red mark on the cassette exposed.
While the index signal is being erased, the
sound cannot be heard and a black band
appears at the bottom of the picture. This will
not affect the recorded sound or picture.
The camcorder can detect index signals marked
with VCRs, but cannot erase them. VCRs with
an index function can detect index signals
marked with this camcorder but cannot erase
them.
An index signal may be erased when making
PCM after recording on another VCR in the
portion where the index signal is marked.
Note on Data Code
When an index signal is erased, Data Code on the
same portion of the tape is also erased.
Стирание индексного сигнала
(1)Найдите индексный сигнал подлежащий
стиранию с использованием функции
индексного сканирования или индексного
поиска.
(2)Нажмите INDEX ERASE на пульте
дистанционного управления в пределах от
2 до 10 секунд во время воспроизведения
желаемой программы. После стирания
индексного сигнала видеокамера
возвращается к режиму индексного
сканирования или индексного поиска, в
зависимости от того, который из них был
использован в пункте 1.
Примечания к стиранию
Нажмите INDEX ERASE более, чем на 2
секунды после начала воспроизведения
желаемой программы.
Вы не можете стереть индексный сигнал с
ленты, если на кассете видна красная метка.
Во время стирания индексного сигнала звук
прослушиваться не может, и черная полоса
появляется внизу изображения. Это не
будет влиять на записанные звук или
изображение.
Видеокамера может детектировать
индексные сигналы, записанные на КВМ,
но не может их стереть. КВМ с индексной
функцией может детектировать индексные
сигналы, записанные на данной
видеокамере, но не может их стереть.
Индексный сигнал может быть стерт при
выполнении РСМ после записи на другом
КВМ в части, где инденксный сигнал был
записан.
Примечание к коду данных
При стирании индексного сигнала код
данных, для той же части ленты также
будет стерт.
Locating the marking position
Нахождение отмеченной
позиции
MARK ERASE
INDEX
2
1
REW FF
#
)
3
0
DATE INDEX
SEARCH
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony CCD-TR3400E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony CCD-TR3400E in the language / languages: English as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony CCD-TR3400E

Sony CCD-TR3400E User Manual - German, French - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info