680785
23
Zoom out
Zoom in
Previous page
1/28
Next page
Maintenance and care
23
Regular checks
Check safety devices regularly, every year at the very least, to ensure they function correctly. Refer to EN 12453:2000.
Safety devices that are sensitive to pressure (e.g. safety switch unit) should be checked every four weeks to ensure they function correctly,
see EN 60335-2-95:11-2005.
In particular, check whether the drive reverses correctly when it encounters a 50 mm high obstacle lying on the ground. Correctly adjust if necessary
and recheck; an incorrect setting presents a hazard.
Check Behaviour yes/no Possible cause Remedial action
Force cut-off
Use 50 mm object to stop
door wing from closing.
Drive reverses when contact
with object is made
yes Automatic cut-off of
supply is working as
it should
Leave all settings as they are.
no Door incorrectly adjusted Have door correctly adjusted by a person
qualied to do so!
Emergency release
Adopt procedure described in
chapter “Operation/handling
– emergency release”.
Emergency release can be
activated easily (pull 1x,
operator is unlocked)
yes Everything in order!
no Drive stops door.
Door and drive
components are strained.
Emergency release is
defective. Door jam
Adjust door CLOSED end switch or activate
backjump (DIP switch 6 ON).
Repair emergency release
Check door. Refer to maintenance
instructions for the door.
Safety switch unit,
if provided
Open/close door whilst,
at same time, operating
safety switch unit
Door behaves in accordance
with setting of DIP switch
1,2 or 3.
yes Everything in order!
no Broken cable,
loose terminal
DIP switch maladjusted
Switch unit defective
Check wiring, tighten terminal connection.
Correctly adjust DIP switch
Take door drive mechanism out of operation
and ensure it cannot restart by accident.
Contact after-sales service!
Light barrier, if provided
Open/close door whilst,
at same time, interrupting
the light barrier.
Door behaves in accordance
with setting of DIP switch
1,2 or 3.
yes Everything in order!
no Broken cable,
loose terminal
DIP switch maladjusted
Light barrier soiled
Light barrier maladjusted
(bent bracket)
Light barrier defective
Check wiring, tighten terminal connection.
Correctly adjust DIP switch
Clean light barrier
Correctly adjust light barrier
Take door drive mechanism out of operation
and ensure it cannot restart by accident.
Contact after-sales service!
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer Sprint Evolution at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer Sprint Evolution in the language / languages: English as an attachment in your email.

The manual is 3,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer Sprint Evolution

Sommer Sprint Evolution User Manual - German - 28 pages

Sommer Sprint Evolution User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info