680783
50
Zoom out
Zoom in
Previous page
1/88
Next page
50
S10931-00001_Rev-D_EN
10. Connections and special functions of the motor
carriage
Resetting
1. Press the green Reset button on the motor carriage
for 15 seconds until the green status LED goes out.
Reset is performed.
10.14 Setting the DIP switches on the
motor carriage
Special functions can be set with the DIP switches on
the motor carriage.
For compliance with EN 13241-1, before initial operation,
the door type must be selected and set on the motor
carriage with the DIP switch. The factory setting of
the DIP switches is OFF, which is then applicable for
sectional doors.
NOTE
Do not use a metal object to set the DIP
switches, because this may damage the
DIP switches or the circuit board.
Use a suitable tool, for example a at
plastic object, to set the DIP switches.
DIP switch on
motor carriage
OFF
ON
1
ON
1
2
3
4
Automatic
closing function
activated
Automatic
closing function
deactivated
2
ON
1
2
3
4
Partial opening
activated/
Lighting
function
deactivated
Partial opening
deactivated/
Lighting
function
activated
3+4
ON
1
2
3
4
3
ON
1
2
3
4
4
ON
1
2
3
4
10.15 Setting automatic closing function
- defining basic values
When automatic closing is activated, the door is opened
by a pulse.
The door moves to the door OPEN end position. The
door closes automatically after the hold open time. With
the factory settings, the door also closes automatically
from the partial opening position when the automatic
closing function is activated.
WARNING
Risk of injury during automatic
closing!
Automatically closing doors can injure
people and animals in the movement
area of the door when the door is
closing. Serious injury or death may
result.
Always keep the moving door in sight.
Keep persons and animals clear of the
range of movement of the door.
Never put your hand near the door or
near moving parts when the door is
moving. In particular, do not reach into
the ceiling holder or the push arm.
Do not drive through the door until it has
opened completely.
NOTE
If the door is not in view and the operator
is actuated, objects in the movement area
of the door may be jammed and damaged.
Objects must not be in the range of
movement of the door.
INFORMATION
The door opens completely if it hits an
obstacle.
INFORMATION
Operation with automatic closing must
comply with EN 12453. This is a legal
requirement. National regulations must
be observed in non-European countries.
A photocell must be connected. Bridging
the safety inputs with jumpers is not
permitted.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9110 pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9110 pro in the language / languages: English as an attachment in your email.

The manual is 10,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9110 pro

Sommer S 9110 pro User Manual - German - 88 pages

Sommer S 9110 pro User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info