680783
44
Zoom out
Zoom in
Previous page
1/88
Next page
44
S10931-00001_Rev-D_EN
9.4 Mechanical adjustment of the end
positions
Increasing the closing pressure of the end
position for door CLOSE
Fig. 1
1. Loosen the screw on the limit stop and move the
limit stop a few millimetres towards door CLOSE.
Re-tighten the screw.
2. The function of the emergency release must be
checked in the door CLOSE end position. Unlocking
must be possible.
Reducing the closing pressure of the end
position for door CLOSE
Fig. 1
1. Loosen the screw on the limit stop and move the
limit stop a few millimetres towards door OPEN.
Re-tighten the screw.
NOTE
Do not push the door all the way to
the mechanical stop. This is because
otherwise, the operator will pull the door
against the mechanical stop. This will apply
tension to the door and it may be damaged.
A clearance of 30 mm is required.
9.5 Attaching information sign and
warning signs
Fig. 1.1 Attach sticker near the stationary control or control unit
Fig. 1.2 Attach sticker on door panel
1. Attach the warning signs and information sign at
a cleaned and degreased point:
far from moving parts
near the stationary control or control unit
at eye level in a highly visible section of the door leaf
2. Carry out obstacle detection, see chapter
"13.1 Testing obstacle detection."
Initial operation is complete.
9. Initial operation
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9110 pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9110 pro in the language / languages: English as an attachment in your email.

The manual is 10,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9110 pro

Sommer S 9110 pro User Manual - German - 88 pages

Sommer S 9110 pro User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info