680783
42
Zoom out
Zoom in
Previous page
1/88
Next page
42
S10931-00001_Rev-D_EN
INFORMATION
The operating forces can be modied and
adjusted with SOMlink and a WiFi-enabled
device.
Fig. 1
1. Compare the existing power supply with the type
plate.
Connect the operator with the mains voltage.
ThestatusLEDofthemotorcarriageashes
green.
Fig. 2
2. After the operator has been connected to the power
supply, its first movement after a pulse is always
door OPEN.
Briefly press button 1 on the preprogrammed
handheld transmitter. See also the separate
instructions for the "Handheld transmitter."
The motor carriage moves slowly to the door
OPEN end position and automatically switches
off at the limit stop.
Theoperatorlightingashes.
Fig. 3
3. Press button 1 on the handheld transmitter again
briefly.
The motor carriage moves slowly in the door
CLOSE direction. The LEDs of the operator lighting
ash.
The motor carriage switches off automatically
when it reaches the factory-set closing force at
the door CLOSE end position.
Theoperatorlightingashesinadifferent
sequence.
Fig. 4
4. Press button 1 on the handheld transmitter briefly
(< 1 second) to save the end position.
Theoperatorlightingashesbrieyinafast
sequence.
The operator automatically starts its
programming process:
The motor carriage moves automatically to the
door OPEN end position again and programs the
required operating force.
The motor carriage automatically moves to the
door CLOSE end position.
If necessary, the motor carriage moves over the
path several times for programming with a greater
door weight.
The motor carriage automaticallymovesbrieyin
the door OPEN direction to program the soft run.
The door automatically returns to the door
CLOSE end position.
The motor carriage automatically moves to the
door OPEN end position.
9. Initial operation
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9110 pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9110 pro in the language / languages: English as an attachment in your email.

The manual is 10,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9110 pro

Sommer S 9110 pro User Manual - German - 88 pages

Sommer S 9110 pro User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info