680783
35
Zoom out
Zoom in
Previous page
1/88
Next page
35
S10931-00001_Rev-D_EN
6. Installation
INFORMATION
The power cord that has been provided
must not be shortened or extended.
All devices to be connected externally must
have safe isolation of the contacts from
the mains voltage supply in accordance
with IEC 60364-4-41.
Wiring for external devices must be installed
in accordance with IEC 60364-4-41.
All electrical wiring, including the control
cable, must be rmly secured to prevent
displacement.
>1,6 m
>1,6 m
Fig. 1
INFORMATION
The drilling depth must be considered with
respect to the ceiling and wall thickness,
particularly with prefabricated garages.
It may be necessary to reduce the hole
depth.
Only use permissible mounting materials
appropriate for the supporting surface.
1. Choose a suitable location for the wall control unit
close to an existing power outlet.
The maximum length of the control cable is 5 m,
and it must not be extended.
Note that the distance between the wall control unit
and the power outlet must not exceed 1.1 m.
The membrane keypad of the wall control unit must
be installed at a height of at least 1.6 m.
Fig. 2 Fig. 3
NOTE
The control unit cover is connected to the
circuit board of the wall control unit via
a connection cable.
If an accumulator has been installed, it
is also connected to the circuit board.
Carefully remove the control unit cover
and unplug the connections. This prevents
damage to the wall control unit.
2. Loosen the screws on the wall unit of the light cover
and remove the light cover upwards. Hold the front
cover firmly while doing so.
3. Remove the control unit cover gently towards
the front and unplug the connection cable for
the membrane keypad from the wall control unit.
57,5 mm
104 mm
57,5 mm
6 mm
40 mm
Fig. 4: Installation example
WARNING
Risk of eye injury!
Chips ying when drilling may cause
serious injuries to eyes and hands.
Wear safety glasses when drilling.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9110 pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9110 pro in the language / languages: English as an attachment in your email.

The manual is 10,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9110 pro

Sommer S 9110 pro User Manual - German - 88 pages

Sommer S 9110 pro User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info