680783
33
Zoom out
Zoom in
Previous page
1/88
Next page
33
S10931-00001_Rev-D_EN
6. Installation
14. Plug the push arm into the door bracket. Insert the
bolt and slide on the safety bolt.
Plug the push arm into the motor carriage at the
front. Insert the bolt and slide on the safety bolt.
15. Align the door bracket with the centre of the door.
Mark the position of the holes and drill them
(Ø 5 mm). Fix the door bracket to the door with
the hexagon bolts.
The push arm is attached to the motor carriage
and the door.
Fig. 16
NOTE
The door must not rub against the operator
or tracks. This could damage the operator
or tracks. The operator must be offset.
16. Open the door completely by hand.
If the door rubs against the operator or the tracks,
the operator must be offset.
The limit stop moves automatically with the motor
carriage.
Fig. 17
NOTE
Do not push the door all the way to
the mechanical stop. This is because
otherwise, the operator will pull the door
against the mechanical stop. This will
apply tension to the door and it may be
damaged.
A clearance of about 30 mm is required.
INFORMATION
The limit stop can be subsequently pushed
under the chain and screwed into the track.
Then screw the limit stop tightly to the
track at the respective spot.
17. Tighten the screw on the limit stop with a Phillips
screwdriver without changing its position.
Check the door OPEN end position:
Open the door fully for this. The motor carriage
moves towards the door OPEN position on the
limit stop until a click noise is heard.
The door OPEN end position is set.
“clic
Fig. 18 Fig. 19
NOTE
In the case of an emergency release,
the door could independently open or
close itself due to a broken spring or
incorrect setting of the weight balancing.
The operator could be damaged or
destroyed. Check the emergency release
regularly.
INFORMATION
It can be locked and released in any door
position.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9110 pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9110 pro in the language / languages: English as an attachment in your email.

The manual is 10,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9110 pro

Sommer S 9110 pro User Manual - German - 88 pages

Sommer S 9110 pro User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info