680782
57
Zoom out
Zoom in
Previous page
1/88
Next page
57
S10931-00001_Rev-D_EN
11. Connections and special functions of the wall
control unit
11.3 Setting the DIP switches on the
wall control unit
Special functions can be set with the DIP switches on
the wall control unit. All DIP switches are set to "OFF"
in the factory settings.
NOTE
Do not use a metal object to set the DIP
switches, because this may damage the
DIP switches or the circuit board.
Use a suitable tool, for example a at
plastic object, to set the DIP switches.
DIP switch on
wall unit
OFF
ON
1
ON
1
23
4
Membrane
keypad T1 for
deneddoor
OPEN
Membrane
keypad T2
deneddoor
CLOSE
Membrane
keypad T1
for pulse
sequence
Membrane
keypad
T2 lighting
function/partial
opening
2
ON
1234
Relay
(MUFU) trips:
during door
movement and
if the door is
not closed*
Relay (MUFU)
lighting
function
3
ON
1234
Continuous
power to the
complete
system
activated
Power-saving
mode activated
4
ON
1234
COM and
Signal
activated
as button
input (partial
opening)
COM and
Signal
activated as
safety contact
for photocell
* e.g.: door status display
11.4 Button assignment of wall control
unit
T1
T2
Fig. Membrane keypad T1 and T2 of wall control unit
Factory settings of the functions of the
membrane keypads
Membrane keypad T1 – pulse sequence
Membrane keypad T2 – lighting function or partial
opening, dependent on DIP switch 2 on motor
carriage
Setting options
If DIP switch 1 is set to "ON" on the wall control unit:
MembranekeypadT1–denedOPEN
MembranekeypadT2–denedCLOSE
11.5 Button 2 for partial opening
If required, a further button can be connected to the
control unit for partial opening operation.
After installation of the keypad, all settings must be made
on the ceiling control unit and the motor carriage.
NOTE
The control unit cover is connected to the
circuit board of the wall control unit via
a connection cable. If an accumulator has
been installed, it is also connected to the
circuit board.
Carefully remove the control unit cover
and disconnect the connections to prevent
damage to the wall control unit.
INFORMATION
If button 2 (partial opening) is used,
a photocell cannot be connected.
The automatic closing operating mode
is then not possible.
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9080 pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9080 pro in the language / languages: English as an attachment in your email.

The manual is 10,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9080 pro

Sommer S 9080 pro User Manual - German - 88 pages

Sommer S 9080 pro User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info