680825
45
Zoom out
Zoom in
Previous page
1/96
Next page
45
S10564-00001_Rev-A_EN
The carriage automatically moves briey in the
door OPEN direction to program the soft running.
The door automatically returns to the door
CLOSE end position.
The carriage automatically moves to the door
OPEN end position.
The LEDs of the operator lighting remain steady.
Operator is programmed and ready for use.
If a photo eye is connected, PHOTO 1 for door
CLOSE, the door automatically closes after the
open holding and clearing time run out.
INFORMATION
The carriage stops if the door is difcult
to move. The door mechanism must be
checked, see Chapter "9.3 Detecting
obstacles during force programming run".
It may be necessary to adjust the end positions.
See Chapter "9.4 Mechanical adjustment of the end
positions".
9.3 Detecting obstacles during force
programming run
If the door detects an obstacle during the door OPEN
and door CLOSE door movements and the force
programming run cannot be completed, the door stops.
NOTE
Check the movement path, mechanism,
spring tension and the weight compensation
to prevent damage to the door system.
1. Press the START IN button on the control unit and
keep it pressed.
The carriage jerks briey and moves in the door
CLOSE direction until the desired end position
has been reached.
2. Release the Start IN button.
3. Fine adjustment:
Press the START IN button on the control unit and
keep it pressed until the carriage jerks briefly.
Release the Start IN button.
9. Commissioning
3.1 The process can be repeated until the desired end
position is reached.
Press the START IN button on the control unit
briefly (< 1 second) to save the door CLOSE end
position.
The carriage starts the automatic force
programming run to the door OPEN end position.
The carriage starts the automatic door CLOSE
force programming run.
If an obstacle is detected again, the carriage stops and
reverses a short distance.
1. Press the START IN button on the control unit and
keep it pressed.
The carriage starts without jerking, because the
end position of door is already saved.
The carriage moves to the end position.
2. Release the START IN button on the control unit.
3. Briefly press the START IN button on the control
unit.
Restart automatic force programming runs.
On completion of the force programming runs the
carriage automatically moves to the door OPEN
end position.
The LEDs of the operator lighting remain steady.
Operator is programmed and ready for use.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9060 Tiga at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9060 Tiga in the language / languages: English as an attachment in your email.

The manual is 28,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9060 Tiga

Sommer S 9060 Tiga User Manual - German - 96 pages

Sommer S 9060 Tiga User Manual - Dutch - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info