680825
41
Zoom out
Zoom in
Previous page
1/96
Next page
41
S10564-00001_Rev-A_EN
8. Electrical connection and special functions
8.1 Connection to mains voltage
The direct connection of the wall control unit to a all-
pole line disconnecter, e.g. a main switch or a power
socket, must be secured. Local and national regulations
(e.g. VDE) must be observed.
The installation of the operator to the mains voltage must
be carried by trained electricians only.
People under the influence of drugs, alcohol, or
medications that can influence their ability to react may
not work on the operator.
Observe in particular the following safety instructions for
this chapter.
DANGER
Danger due to electric current!
Contact with live parts may result
in electric current owing through
the body. Electric shock, burns or death
will result.
All work on electrical components
may only be carried out by a trained
electrician.
Before commissioning, ensure that
the mains voltage of the power source
corresponds with the voltage listed on
the operator type plate.
Do not connect the mains voltage until
mounting is complete.
If a battery pack must be connected,
establish the connection to the battery
pack as the nal step.
Then check that the operator is
disconnected from the power supply.
NOTE
Do not connect the wall control unit to the
mains voltage until installation is complete
to prevent damage to the operator.
INFORMATION
All devices to be connected externally
must have a safe isolation of the contacts
from the mains voltage supply according to
EC 60364-4-41.
Wiring for external devices must be
installed in accordance with IEC 60364-4-41.
All electrical wiring, even the control
cable, must be rmly secured to prevent
displacement.
L`
N
LN
Fig. Mains connection
Connection to the mains voltage must not be established
until mounting is complete. The connection to the battery
pack is the last.
INFORMATION
In order to connect a power socket to a all-
pole line disconnecter, e.g. a main switch,
the wall control unit must be installed as
follows:
the supplied network cable is about
0.7 m long and must not be shortened or
extended.
easily visible and accessible
600 mm
Fig. Distance of wall control unit to power socket
Note that the distance between the wall control unit and
the power socket must not exceed 0.6 m.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9060 Tiga at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9060 Tiga in the language / languages: English as an attachment in your email.

The manual is 28,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9060 Tiga

Sommer S 9060 Tiga User Manual - German - 96 pages

Sommer S 9060 Tiga User Manual - Dutch - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info