680825
34
Zoom out
Zoom in
Previous page
1/96
Next page
34
S10564-00001_Rev-A_EN
6. Installation
INFORMATION
The drilling depth must be considered
concerning the ceiling and wall thickness,
particularly with prefabricated garages.
It may be necessary to reduce the hole
depth.
Only use permissible fastening materials
appropriate for the supporting surface.
5. Drill two holes (Ø 10 x 65 mm deep) in the ceiling
or lintel.
6. Open the door.
Transfer the mark from the centre of the door to the
ceiling.
13 mm
Fig. 7
7. Close the door.
The operator can be mounted on the lintel or the
ceiling.
Lift the track at the front.
Screw the lintel fitting at the front to the lintel or
ceiling with two screws and the washers. Tighten the
screws.
The track is attached to the lintel or ceiling.
Fig. 8
NOTE
The operator must always be installed
parallel to the tracks or the door to prevent
damage to the operator and the rails.
8. Align the operator parallel to the running tracks of
the door.
Fig. 9 Fig. 10
9. Align the track parallel to centre of the door at
the rear.
Align the ceiling bracket.
The distance between the rear plug-in unit and the
ceiling holder should be 100 - 700 mm. The ceiling
bracket should be installed in this area.
Check the alignment of the track with a spirit level.
10. Mark the holes on the ceiling for the ceiling holder.
Drill two holes (Ø 10 x 65 mm deep).
Insert the anchor fittings.
Insert two screws with washers and screw the
perforated strips to the ceiling. Tighten the screws.
The track is attached to the ceiling.
Fig. 11
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9060 Tiga at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9060 Tiga in the language / languages: English as an attachment in your email.

The manual is 28,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9060 Tiga

Sommer S 9060 Tiga User Manual - German - 96 pages

Sommer S 9060 Tiga User Manual - Dutch - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info