680825
17
Zoom out
Zoom in
Previous page
1/96
Next page
17
S10564-00001_Rev-A_EN
3. Description of function and product
3.4 Operator response with factory
settings
Response after power connection
The door is closed and the operator is programmed.
All traffic lights are off. The first direction is always
door OPEN. If the door is already open, the operator
detects this. After a command to the operator, the
command side is granted access authorisation.
The operator closes the door after the open holding time
and clearing time run out.
Expiration after a command from the interior or
exterior, door CLOSE
The traffic lights give the respective light signals for
access authorisation.
1. Command from interior or exterior.
Door opens.
Both sides: Red phase - no authorisation for
drive-through.
Door is open.
Open holding time starts.
Request side: Traffic light off - authorisation for
drive-through.
Opposite side: Red phase - no authorisation for
drive-through.
Open holding time set at factory runs out.
Clearing time for door CLOSE starts.
Operator lighting LED of the carriage ashes.
Both sides: Red phase – no authorisation for
drive-through.
Door closes.
Both sides: Red phase - no authorisation for
drive-through.
Door is closed.
Both sides: Trafc lights off.
Response after a request from the interior and an
additional request from the exterior
1. Command from the interior and subsequent
command from the exterior.
Door opens.
Both sides: Red phase - no authorisation for
drive-through.
Door is open.
Open holding time starts.
Request side, interior: Traffic light off -
authorisation for drive-through.
Opposite side, exterior: Red phase – no
authorisation for drive-through.
Open holding time set at the factory for the
command from the interior runs out.
Clearing time starts.
Operator lighting LED of the carriage ashes.
Both sides: Red phase, no authorisation for
drive-through.
2. Command from the exterior is initiated.
The request and opposite sides are exchanged here.
Open holding time starts.
Request side, exterior: Traffic light off –
authorisation for drive-through.
Opposite side, interior: Red phase – no
authorisation for drive-through.
Open holding time set at factory runs out.
Clearing time for door CLOSE starts.
Operator lighting LED ashes.
Both sides: Red phase – no authorisation for
drive-through.
Door closes.
Both sides: Red phase - no authorisation for
drive-through.
Door is closed.
Both sides: Trafc lights off.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9060 Tiga at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9060 Tiga in the language / languages: English as an attachment in your email.

The manual is 28,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9060 Tiga

Sommer S 9060 Tiga User Manual - German - 96 pages

Sommer S 9060 Tiga User Manual - Dutch - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info