680828
86
Zoom out
Zoom in
Previous page
1/100
Next page
86
S10557-00001_Rev-A_EN
15. Troubleshooting
WARNING
Danger of crushing and shearing!
If the door moves with persons or
animals in the movement area, crushing
and shearing injuries may be caused
by the mechanism and safety edges of
the door.
Only use the operator in direct view of
the door.
Always keep the moving door in sight.
Persons or animals must not be in the
range of movement of the door.
Never put your hand near the door
or moving parts when it is moving.
In particular, do not reach into the
moving push arm.
Do not reach into the ceiling mounting
unit when the carriage runs along the
track.
Only pass through the door only once it
is completely open and the trafc light is
green.
WARNING
Danger due to optical radiation!
Looking into an LED at short range for
an extended period may cause optical
glare.
This may temporarily reduce vision.
This may cause serious or fatal
accidents.
Do not look directly into a LED.
WARNING
Danger due to hot surfaces!
After frequent operation parts of the
carriage or the control unit may become
hot. If the cover is removed and hot
parts are touched, they may cause
burns.
Allow the operator to cool before
removing the cover.
NOTE
If the door is not in view and the radio
remote control is actuated, objects in the
movement area of the door may be jammed
and damaged.
Objects must not be in the range of
movement of the door.
INFORMATION
The control unit detects a short-circuit
between chain and track and then switches
the operator off.
15.2 Troubleshooting
The following guide to troubleshooting lists potential
problems and their causes and information on correcting
them. In some cases, other chapters and sections with a
more detailed description are referenced.
You will be prompted to call a qualified specialist if this is
required.
Work on the electrical system and live parts may be
performed only by a trained electrician.
1. Pull the power plug out of the power socket.
If a battery pack has been installed, remove the
control unit cover and disconnect the battery pack
from the control unit, see also Chapter "7.2 Wall
control unit cover" and Chapter "11.10 Installing
and removing battery pack".
Then check that the power is disconnected.
2. After working on the operator, if applicable replace
the battery pack in reverse order.
Plug the power plug into the power socket.
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9060 Tiga plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9060 Tiga plus in the language / languages: English as an attachment in your email.

The manual is 10,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9060 Tiga plus

Sommer S 9060 Tiga plus User Manual - German - 100 pages

Sommer S 9060 Tiga plus User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info