680828
80
Zoom out
Zoom in
Previous page
1/100
Next page
80
S10557-00001_Rev-A_EN
13. Operation
Safety
If the SAFETY safety input is open, the operator stops
the door movement. No more commands are executed.
The potential-neutral NC contact, for example, is suitable
for connecting an emergency stop.
Status LED on the control unit ashes.
Resetting the SAFETY safety input:
1. Reset safety input (close contact).
2. Execute a command using the button.
Door opens up to door OPEN end position.
Open holding and clearing time run out.
Door closes automatically.
13.5 Power-saving mode
To save energy, the operator control unit switches to
power-saving mode after the factory-specified period.
Connected accessories are deactivated and then
reactivated at the next command from a button or radio.
Connected accessories may include: photo eye, safety
contact strip and external radio receiver.
Because external radio receivers are deactivated in
power-saving mode, they cannot receive commands from
the remote control and send them to the operator.
Set DIP switch 3 to ON to power the entire system
continuously. Power-saving mode is then deactivated.
ON OFF
Continuous power to the
complete system activated
Power-saving mode
activated
INFORMATION
The factory-set period before the control
unit switches to power-saving mode after
expiration of the set burning time is 20
seconds. This value cannot be changed.
If the operator is in power-saving mode, the green status
LED flashes briefly in 3-second cycles.
13.6 Operation during power failure
The programmed force values and end positions of the
operator remain saved in the event of a power failure.
After the power supply has been restored, the first
movement of the operator after a pulse is always door
OPEN.
Also see the information on emergency release in Chapter
"11.10 AInstalling and removing battery pack" and
"Function of the emergency release".
13.7 Function of the emergency release
Observe in particular the following safety instructions for
this chapter.
In the event of a power failure, the door can be opened
manually from the inside using a mechanical emergency
release.
WARNING
Danger for trapped persons!
Persons may be trapped inside the
garage. If trapped persons cannot free
themselves, severe injury or death may
result.
The operation of the emergency release
must be tested regularly from inside and
if necessary also from outside.
Faults must be repaired without delay.
WARNING
Danger due to falling parts of
doors!
If the emergency release is actuated,
weak or broken springs may cause
the door to close suddenly and
unexpectedly.
This may cause serious or fatal injury.
The emergency release should only be
used with the door closed.
Use the emergency release with great
caution if the door is open.
Persons or animals must not be within
the door’s range of movement.
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9060 Tiga plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9060 Tiga plus in the language / languages: English as an attachment in your email.

The manual is 10,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9060 Tiga plus

Sommer S 9060 Tiga plus User Manual - German - 100 pages

Sommer S 9060 Tiga plus User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info