680828
55
Zoom out
Zoom in
Previous page
1/100
Next page
55
S10557-00001_Rev-A_EN
10. Connections and special functions of the carriage
10.21 12 V output
This output can be used for the power supply of external
accessories. 12V DC max. 100 mA are available for them.
8K2
+12V
br
gn
wh
+12V
OSE
8
K
b
r
g
n
+
12
V
O
S
E
K
2
E
Fig. Output 12 V
Terminal block Function
br = +12 V DC Output 12 V DC,
max. 100 mA
wh = GND
External consumers can be connected in this operating
mode, for example a finger scanner on the door panel. In
this operating mode, power-saving mode is not available
and must be deactivated, see Chapter "13.5 Power-
saving mode".
INFORMATION
Power-saving mode must be deactivated
for this operating mode. Set DIP switch 3
on the wall control unit to ON.
10.22 Setting partial opening
This function partially opens the door.
Example:
A side-opening sectional door can be opened to allow
a person to pass through. The partial opening can be
used via radio control system or button 2, see Chapter
"11.8 Connection options for control device".
INFORMATION
The specied partial opening can be from
any position of the door.
INFORMATION
The automatic closing function must be
deactivated in order to program the partial
opening function.
INFORMATION
When the door has reached the partial
opening position, the red trafc lights light
up on both sides of the door.
1. Close the door completely up to the door CLOSE
end position.
2. Press the radio button repeatedly to select radio
channel CH 2 and to program the function to the
desired transmitter button.
3. Set DIP switch 2 on the carriage to ON.
4. Press the desired button on the transmitter for the
partial opening function.
The door moves in door OPEN direction.
5. Press the desired button on the transmitter again to
stop it.
The door stops at the desired position.
The partial opening function is programmed.
6. Press the button on the transmitter again.
7. The door moves to the door CLOSE end position.
The partial opening function is programmed.
10.23 Deleting partial opening
1. Set DIP switch 2 on the carriage to OFF.
2. Open the door completely up to the door OPEN end
position.
Partial opening is deleted.
To program a new position, see Chapter "10.22 Setting
partial opening".
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9060 Tiga plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9060 Tiga plus in the language / languages: English as an attachment in your email.

The manual is 10,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9060 Tiga plus

Sommer S 9060 Tiga plus User Manual - German - 100 pages

Sommer S 9060 Tiga plus User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info