680828
54
Zoom out
Zoom in
Previous page
1/100
Next page
54
S10557-00001_Rev-A_EN
10.17 Pre-warning time
In the pre-warning time, the red traffic light blinks on both
sides before opening or closing the door. The warning
light and the operator lighting of the carriage also flash.
No pre-warning time is activated in the factory settings.
INFORMATION
The pre-warning time can be separately
activated and adjusted for door OPEN
and door CLOSE with SOMlink and a
smartphone.
The setting range is 0-65 seconds.
The progress of the pre-warning time is
displayed by the ashing operator lighting
and the warning light.
10.18 Priority switching
Priority switching is used when entry from the exterior
request side has a higher priority than that of the interior
request side - for the exit. For example, when there is a
very short entry and the car protrudes into the street.
If the interior request side has the green phase and a
command comes from the exterior request side, the
interior green phase is terminated.
After the clearing time (factory setting: 10 seconds),
the exterior request side receives the green phase.
INFORMATION
Priority switching can be activated and
adjusted with SOMlink and a smartphone.
10.19 Shortened open holding time for
driving through the photo eye
Shortening of the open holding time after driving through
the photo eye is activated in the factory settings and is
5 seconds.
Door is in the door OPEN end position.
The photo eye is crossed.
Shortening of the open holding time is now
activated.
Door closes for 5 seconds after passing through
photo eye.
INFORMATION
Shortening the open holding time can be
deactivated and changed with SOMlink and
a smartphone.
The setting range is 5- 65 seconds. When
shortening of the open holding time is
deactivated, the set open holding time of
the automatic closing function is restarted
when driving through the photo eye.
10.20 Clearing time
The clearing time starts after the open holding time runs
out. During clearing time, the red traffic lights light up and
the drive lighting on the carriage also flashes.
Persons or vehicles which had the green phase on the
request side (interior/exterior) must clear the entrance
during this time.
INFORMATION
The clearing time is 10 seconds (factory
setting) and can be changed by SOMlink
and a smartphone.
The setting range is 1- 60 seconds.
10. Connections and special functions of the carriage
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9060 Tiga plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9060 Tiga plus in the language / languages: English as an attachment in your email.

The manual is 10,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9060 Tiga plus

Sommer S 9060 Tiga plus User Manual - German - 100 pages

Sommer S 9060 Tiga plus User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info