680779

Sommer S 9060 pro plus Manual

76
Zoom out
Zoom in
Previous page
1/88
Next page
76
S10931-00001_Rev-D_EN
16. Troubleshooting
WARNING
Danger of crushing and shearing!
If the door moves and there are persons
or animals in the movement area,
crushing and shearing injuries may be
caused by the mechanism and safety
edges of the door.
► Only use the operator when you have
a direct view of the door.
► All danger zones must be visible during
the entire door operation.
► Always keep the moving door in sight.
► Keep persons and animals clear of
the range of movement of the door.
► Never put your hand near the door
when it is moving or near moving parts.
In particular, do not reach into the
moving push arm.
► Do not reach into the ceiling suspension
unit when the motor carriage is running
along the track.
► Do not drive through the door until it
has opened completely.
► Never stand under the opened door.
WARNING
Danger due to optical radiation!
Looking into an LED at short range for
an extended period may cause optical
glare. This may temporarily reduce
vision. This may cause serious or fatal
accidents.
► Never look directly into an LED.
WARNING
Danger due to hot surfaces!
After frequent operation, parts of the
motor carriage or the control unit may
become hot. If the cover is removed and
hot parts are touched, they may cause
burns.
► Allow the operator to cool down before
removing the cover.
NOTE
If the door is not in view and the radio
remote control is actuated, objects in the
movement area of the door may be jammed
and damaged.
Objects must not be in the range of
movement of the door.
INFORMATION
The control unit detects a short-circuit
between chain and track and then switches
the operator off. If the short circuit is no
longer present, the operator runs normally
again.
16.2 Troubleshooting
The following guide to troubleshooting lists potential
problems and their causes and information on correcting
them. In some cases, other chapters and sections with
a more detailed description are referenced. You will be
prompted to call a qualified specialist if this is required.
Work on the electrical system and live parts must be
performed by a trained electrician.
1. Pull the power plug out of the power outlet.
If an accumulator has been installed, remove
the ceiling control unit cover and disconnect the
accumulator from the control unit, see Chapter
"7.3 Light and control unit cover of the wall
control unit" and chapter "11.12 Installing and
removing the accumulator."
Then check that the power is disconnected.
2. After working on the operator, if applicable replace
the accumulator in reverse order.
3. Connect the operator to the mains voltage.
Check that the power supply is connected.
⇒ The operator is supplied with mains voltage.
… 76 …


Need help? Post your question in this forum.

Forumrules
1

Forum

sommer-s-9060-pro-plus

Reset search

  • après une coupure de courant d une semaine la porte ne ferme plus complètement. comment faire un réset sur un moteur sommer s pro + merci Submitted on 5-10-2022 at 22:16

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer S 9060 pro plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer S 9060 pro plus in the language / languages: English as an attachment in your email.

The manual is 10,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer S 9060 pro plus

Sommer S 9060 pro plus User Manual - German - 88 pages

Sommer S 9060 pro plus User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info