Scope of supply
• The scope of supply can vary according to the type of operator supplied.
1. 1 x control unit housing (with button line and power cord)
2. 1 x trolley
3. 2x C-rails
4. 1 x connecting piece
5. 1x switch trigger “H”
6. 1x switch trigger “V”
7. 1x chain
8. 1x connecting rod
9. 1x door hinge
10. 1x ceiling suspension bracket (for marathon tiga 1100 SL 2 units)
11. 1x Installation and operating instructions
12. 1x assembly kit
13. 1x signal light control unit
14. 1x signal line (7 m)
Safety instructions
• The power cable supplied as standard may neither be shortened nor
lengthened.
• The power supply voltage must correspond to that indicated on the
operator’s rating plate.
• All devices requiring external connection must be equipped with safe
contact separation as per IEC 364-4-41, in order to isolate them from the
mains voltage supply.
• Live parts of the operator (voltage-carrying parts e.g. C-rails) may not be
connected to earth or to the live parts, or to protective conductors of
other circuits.
• IEC 364-4-41 must be observed when laying the external device conduc-
tors.
Caution!
Risk to life and limb! Remove all ropes and loops that are required
for the manual operation of the door.
Installing the slip-door safety
mechanism or release lock
• If your garage door is fitted with a slip door but not with a slip-door safety
mechanism, then you need to have one installed (see “Accessories”).
• If your door does not have a slip-door and your garage does not have
a separate entrance, then install a release lock or Bowden cable for
operator release from the outside (see “Accessories” instructions).
Required tools
Personal protective equipment
• Goggles (for drilling)
• Protective gloves (for handling cut perforated steel strips, etc.)
