474216
22
Zoom out
Zoom in
Previous page
1/32
Next page
Functions and connections
22
Variant 3: automatic closing + safety contact
strip (8.2 kOhm) + photo eye
NOTE!
Install a switch in the photo eye supply line for manual
interruption of automatic close.
However, as described above, the drive closes the door 5 seconds after
crossing the photo eye.
Connect the photo eye in sequence with the safety contact strip to the
terminal 6 + 7.
Settings:
Set the potentiometer for the desired time (1–120 seconds)
DIP switch 1, 2, 7 + 8 OFF
DIP switch 4 ON
other DIP switches as desired
Direct connector, 24-pole
Permissible cable gauge: max. 1.5 mm².
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
1
2
12
14
18
3
13
15
19
Cable length max. 10 m (at the terminal): 10 + 11, 16 + 17, 18 + 19,
20 + 21
Cable length max. 30 m (at the terminal): 2 + 3, 4 + 5, 6 + 7, 8 + 9
Terminal 1 Connection of the 40 MHz antenna
Terminals 2 + 3 Button 1 (potential-free NO contact) *
Terminals 4 + 5 Button 2 (potential-free NO contact) *
Terminals 6 + 7 Safety input terminal 1 (jumper) *
Terminals 8 + 9 Safety input terminal 2 (jumper) *
Terminals 10 + 11 Regulated DC 24 V, max. 0.1 A
Terminals 12 + 13 Chain (12) + C-rail (13) *
Terminals 14 + 15 Secondary transformer *
Terminals 16 + 17 Warning light 1, unregulated DC 24 V
Terminals 18 + 19
Internal lighting/warning light 2, unregulated DC 24 V *
Terminals 20 + 21 Unregulated DC 12 V
Terminal 22 Unassigned
Terminals 23 + 24 Floating relay output, AC 230 V, max. 5 A
* Factory-set assignment
Carriage circuit board
M550-800
5
2
1
4
6
7
8
3
M1000
5
2
1
4
6
7
8
3
Terminal 1 Chain current draw
Terminal 2 Rail current draw
Terminals 3 + 4 Door OPEN
Terminal 5 Motor cable
Terminal 6 Motor cable
Terminals 7 + 8 End switch door CLOSE
Connect button 1
ATTENTION!
Only use the connection for potential-free closer contacts.
External voltage can damage or destroy the controller.
As-delivered status: Button cable connected to button 1.
2
3
4
5
6
7
8
9
10
11
1
2
3
SO
M
M
ER
Terminals 2 + 3 Button 1 connection
Connect button 2
ATTENTION!
Only use the connection for potential-free closer contacts.
External voltage can damage or destroy the controller.
Use button 2 as necessary for the functions described in the following.
2
3
4
5
6
7
8
9
10
11
12
13
1
4
5
SO
M
M
ER
Terminals 4 + 5 Button 2 connection
Button 2 is only required for the “De ned opening and closing” or “Partial
opening” functions.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer Marathon 1100SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer Marathon 1100SL in the language / languages: English as an attachment in your email.

The manual is 4,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer Marathon 1100SL

Sommer Marathon 1100SL User Manual - German - 32 pages

Sommer Marathon 1100SL User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info