474216
20
Zoom out
Zoom in
Previous page
1/32
Next page
20
General information
As delivered, DIP switches are set to the “OFF” position, all additional
functions are switched off.
Depending on the position (OFF or ON) of a DIP switch, additional
functions can be switched on off.
Obstacle detection (DIP 1, 2 + 3)
Drive behavior when opening the door
If the door encounters an obstacle (power cut-off) or a safety input
is interrupted (e.g. someone passes through the photo eye), the drive
detects this and reacts according to the setting of DIP switch 1.
DIP switch 1
OFF No reaction during an interruption of a safety input.
The door stops during a power cut-off.
ON The drive stops the door.
(No reaction with 8.2 kOhm, Fraba system)
Drive behavior when closing the door
If the door encounters an obstacle (power cut-off) or a safety input
is interrupted (e.g. someone passes through the photo eye), the drive
detects this and reacts according to the setting of DIP switches 2 + 3.
DIP switch 2: Safety connection 1, terminals 6 + 7 function
OFF NC contact for photo eyes/8.2 kOhm (safety contact strip)
ON Fraba system
DIP switch 3
OFF Drive stops and opens the stop slightly, reversion.
ON The drive stops and opens the door completely.
Mode of operation: safety
connection 1 (DIP 2)
NOTE!
In the OFF position, the drive automatically detects whether
a photo eye or an 8.2 kOhm strip is connected.
DIP switch 2 (terminals 6 + 7)
OFF Photo eyes/8.2 kOhm safety contact strip
ON Fraba system
Prewarning time (DIP 5)
The warning light blinks, after 3-second actuation of the button or hand-held
remote control, before the drive starts and the drive is to open or close the
door. The prewarning time is cancelled if the button or hand-held remote
control is actuated again within this timeframe.
The prewarning time affects both the internal illumination and a connected
warning light.
DIP switch 5
OFF deactivated
ON activated
Backjump (DIP 6)
NOTE!
You can activate Backjump for sectional doors or doors
with ceiling guides by means of DIP switch 6; this relieves
the drive and door mechanisms. Simpler actuation of the
emergency release.
Serves to relieve the door and drive mechanical system. After reaching the
door CLOSE end position, the drive moves in the direction of door OPEN,
relieving the mechanical system.
DIP switch 6
OFF deactivated
ON activated
De ned opening and closing (DIP 7)
Button/channel 1 open and button/channel 2 close the door. The 2-channel
mode can also be used with only 2 buttons or with hand-held remote
controls.
Requirement: DIP switch 8 OFF, 2 buttons connected or 2 hand-held
transmitter buttons programmed.
DIP switch 7
OFF deactivated
ON activated
Partial opening (DIP 8)
Depending on the setting, this function partially opens the door.
Use examples: airing out the garage, opening the side-sectional door for
personal access, and many others. Two buttons or a hand-held remote
control are necessary for partial opening.
DIP switch 8
OFF deactivated
ON activated, DIP switch 7 non-functional
Partial opening with 2 buttons
Install additional button and connect to terminals 4 + 5 as button 2.
Button 1 always opens the door completely.
If the door is partially opened with button 2, pressing button 1 opens
the door completely.
Button 2 performs the partial opening only if the door is closed.
If the door is to be completely opened with button 1 or partially opened
with button 2, pressing button 2 again closes the door.
Functions and connections
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sommer Marathon 1100SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sommer Marathon 1100SL in the language / languages: English as an attachment in your email.

The manual is 4,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sommer Marathon 1100SL

Sommer Marathon 1100SL User Manual - German - 32 pages

Sommer Marathon 1100SL User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info