658839
18
Zoom out
Zoom in
Previous page
1/46
Next page
Your SOLO chainsaw - Chain brake
ENGLISH 18
E
N
G
3.9 Chain brake
When the chain brake is activated, it stops the saw chain in a fraction of a second.
Automatic engagement:
In an emergency, the chain brake engages instantly in response to the inertia caused by kickback.
Please note that even the highly effective automatic chain brake cannot offer complete
protection against injury. Always work with great care and always avoid working situations which
would put you at risk of kickback
Manual activation:
# To manually activate the chain brake,
press the hand protection (3) forwards
towards the guide bar.
$ To release the chain drive (i.e. cancel
the chain brake), pull the hand protection
(3) back to the front handle (4) again.
Manual activation of the saw chain brake is intended as a means of immobilising the tool under the
following circumstances:
in order to provide a quick response in an emergency,
in all situations in which the operator cannot knowingly control the position of the guide rail or in
which the risk of unintentional contact between the saw chain and a foreign body or the user
himself cannot be entirely excluded. This applies particularly when
o starting the engine,
o carrying the power tool,
% e.g. when assessing the object being cut or the surroundings
% as well as when walking from one working area to the next.
In order to avoid excessive wear, the chain brake should not be applied until the chainsaw has
come to a standstill - except of course in an emergency. During start-up, once the engine has
started the part throttle setting should be cancelled as soon as possible by briefly pulling the throttle
control. This ensures that the engine does not have to work against the blocked chain for too long
under part throttle.
Each time, before commencing your work, check the function of the chain brake as follows:
Start the engine (see chapter 5.)
trigger the chain brake at idle speed
briefly operate the throttle once with the chain brake activated
! the chain should then not move.
Never operate the chainsaw if it is faulty; instead let a service workshop check your power tool
immediately.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solo 651SP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solo 651SP in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info