658837
21
Zoom out
Zoom in
Previous page
1/46
Next page
Preparing the equipment for use - Adjusting the chain tension
ENGLISH 21
E
N
G
4.2 Adjusting the chain tension
The chain has the correct tension if it makes full contact with the guide bar but can still be
lifted off the guide bar by hand by around 2 - 4 mm.
13a* 13b*
13a / 13b: depending on the version
Loosen the retaining nuts on the rail cover (12) using the enclosed combination tool.
To increase the chain tension, turn the chain tensioning bolt (13) clockwise,
To slacken the chain tension, turn the chain tensioning bolt anti-clockwise.
Place the rail tip on a suitable wooden
support (e.g. a tree stump), and in doing so
press the guide rail slightly upwards.
In this position, set the correct chain tension
and tighten the retaining nuts.
Then check the chain tension again and
correct as required.
(schematic diagram)
Note: the process of placing the tip down and pushing up the guide rail simulates the working position
while cutting.
Always check the chain tension before starting the device and adjust it as required.
You should also check the chain tension again and adjust it as required once the power tool
has warmed up and again intermittently while working with the tool – but make sure the engine
is switched off first!
As the chain tightens again slightly when the device cools off, slacken the chain tension a little
once you have finished work before putting the chainsaw into storage.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solo 651 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solo 651 in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info