658836
39
Zoom out
Zoom in
Previous page
1/46
Next page
Operating and maintenance information - Self-help tips, - Shutdown and storage,
ENGLISH 39
E
N
G
8.9 Self-help tips
Possible malfunctions: ...........................................................................................!
The engine will not start
o Correct starting settings? (E.g. the stop switch).........................................! Kap. 5.2
o Spark plug?
" Clean or replace .....................................................................! Kap. 8.6
o Combustion chamber oversaturated
" Unscrew the spark plug, dry, vent the combustion chamber..! Kap. 5.3
o Old fuel?
" Drain and clean the tank, refuel with fresh fuel ......................! Kap. 4.3
The chain will not run
" Chain brake (release when working) ......................................! Kap. 3.9
The chain is driven at idle
" Correctly adjust the idling stop screw "T" ...............................! Kap. 8.2
o Defective clutch
" Service workshop
Poor engine performance
o Air filter clogged
" Clean both filters.....................................................................! Kap. 8.3
o Choke not fully open
" Press the choke lever right in .................................................! Kap. 3.8
o Carburettor settings ("L" / "H“ settings)
" Service workshop
The saw chain is not cutting well
o Chain is blunt / incorrectly sharpened
" Sharpen the chain correctly....................................................! Kap. 8.1
8.10 Shutdown and storage
The chainsaw should be thoroughly cleaned and checked for damage after every use. The most
important areas are the chain brake, the cooling air intake area, the cylinder cooling fins and the air
filter. Only use the eco-friendly cleaning agents available from a specialist retailer. Do not use fuel to
clean the chainsaw.
Tip: "SOLO Universal Cleaner" (Order no.: 00 83 116). After a short soaking-in period even the
toughest, most baked-on residue can be easily wiped off with a cloth.
The chainsaw should be stored in a dry room and fitted with a chain guard. There must be no naked
flames or similar in the vicinity. Measures must be taken to prevent unauthorised use of the chainsaw,
particularly by children.
If you plan to stop using the saw for more than four weeks then you should also drain the fuel tank
and the chain lubrication oil tank in a well vented area and clean them. Start the engine with the fuel
tank empty and run it until the carburettor is empty and the engine goes out. Otherwise oil residue
from the fuel mixture could block the carburettor nozzles and make subsequent starts more difficult.
Important: If you are using bio-chainsaw oil and planning to stop using the chainsaw for at least 2
months then you should run the chainsaw for a while with the oil tank filled with engine oil (SAE 30),
so that all residue of the bio-oil is flushed from the tank, oil pickup hose and cutting device.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solo 644 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solo 644 in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info