658836
38
Zoom out
Zoom in
Previous page
1/46
Next page
Operating and maintenance information - Scheduled maintenance
ENGLISH 38
E
N
G
8.8 Scheduled maintenance
The following information is based on standard operating conditions.
For special conditions, such as prolonged daily use, the recommended
maintenance intervals should be reduced accordingly.
Implement all maintenance jobs regularly. If required, authorise a
specialist service centre to maintain the machine for you. The owner of
the machine is responsible for:
Any damage caused by a lack of maintenance, incorrect or late
maintenance and repairs
Consequential losses - including corrosion - from incorrect storage
after the first 5 hours
Daily, before and/or after work and also
in between
weekly
after every 50 hours
after every 100 hours
as required
Yearly before or after the season
Visual inspection
X
Complete machine
Clean (incl. air inlet, cylinder cooling fins)
X X X
Visual inspection
X
Reverse the blade
X
Lubricate the guide sprocket
X
Clean the chain groove / oil bore
X
Guide bar
Clean the blade cover on the inside
X
Visually inspect condition, check sharpness
X
Re-sharpen
X X
Saw chain
Renew, possibly renew the sprocket as well and
lubricate the sprocket bearing
X
Functional test, check for ease of operation
X
Chain brake
Clean, lubricate joints
X X
Chain lubrication
Check
X
Silencer
Visual inspection of condition – check tightness
of screws/bolts
X
Check idling speed
X
Carburettor
Adjust idling speed
X
Clean
X
Air filter
(pre-filter and main air filter)
Replace
X
Check the electrode gap and adjust, if required
X X
Spark plug
Replace
X X
Fuel tank, oil tank
Clean
X X
Fuel filter
Replace
X
All accessible screws
(except for adjusting screws)
Retighten
X XX
Other control elements * Funktionsprüfung
X
* [stop switch, grip heating (specific models only), throttle control, throttle control lock, choke part
throttle stop, starter, sliding switch for winter and normal mode]
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solo 644 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solo 644 in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info