655639

Solo 475 Comfort Manual

24
Zoom out
Zoom in
Previous page
1/88
Next page
3 Preparing the device for use
ENGLISH 6
3 Preparing the device for use
3.1 Assembly
The backpack sprayer is dismantled before it is
dispatched. It must be fully reassembled again
before it is used.
Mounting of carrying system
(Model 425 Pro, 475 Pro), See Fig. 1 – Fig. 14
Installation of the pump lever:
See "Assembly Instruction of the pump lever"
Fig. 15 – Fig. 19
Fig. 15 Î Model 475 Comfort, 475 Pro:
The backpack sprayer is prepared at the factory for
left-hand side installation of the pump lever (facing
towards the tank inscription).
If you prefer the pump lever to be mounted on the
other side, reposition the safety clips (a) on the
opposite side.
The pump lever can be attached to either side of
the device. The figures show mounting on the left
(on the right, mounting is performed accordingly).
Fig. 16:
When fitting the pump lever, the retaining tube (b)
of the pump lever should be facing upwards and
back (facing towards the tank inscription).
Fig. 17 , Fig. 18:
1. Push washer onto the shaft
2. Push pump lever onto the shaft
3. Screw the pump lever to the shaft with screw
and washer, secure with nut.
Fig. 19:
The pump lever length can be adjusted in three
lengths. For this, depress the pin (i), move the
pump handle (c) and latch the pin (i) in one of the
three bores (j).
Fig. 20:
To put down the device, the pump lever can be
turned up with the pump handle (c) in the holder
pipe (b).
For work, turn the pump lever down again with the
pump handle (c) in the holder pipe (b).
Modell 425 Comfort, 475 Comfort, 425 Pro,
475 Pro:
Outside of work, the spraying tube (e) is attached
to the red carry handle (d).
(schematic diagram / depending on the model)
a. safety bracket
(Model 475 Comfort, 475 Pro)
b. holder pipe
c. pump handle
d. carry handle (Model 425 Comfort,
475Comfort, 425 Pro, 475 Pro)
e. spraying tube
f. nozzle attachment
g. hand valve
h. pressure gauge (Model 425 Pro, 475 Pro)
Installation of the spray tube (e):
x Fasten the threaded collar (k) on straight and
firmly screw the spray tube with O-ring
(16x3 mm) hand-tight onto the shut-off valve (g).
Do not use any tools!
x Firmly screw the nozzle attachment (f) with the
O-Ring (10x2 mm) hand-tight onto the spray
tube. Do not use any tools!
x Model 425 Comfort, 435 Comfort, 475
Comfort:
Comfort:
Standard nozzle: flat-spray nozzle 04-F110, red,
order no.: 4074263
Alternative nozzle: hollow cone nozzle 1.4 mm Ø,
black, order no.: 4074755 + 4074756
Fig. 22 - Comfort
Fig. 21
a (only for
475 Comfort,
475 Pro)
h (only for
425 Pro,
475 Pro
Month/year of production
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solo 475 Comfort at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solo 475 Comfort in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info