Manual Solo 416 (page 24 of 120) (English, German, Dutch, French, Italian, Spanish)

655787

Zoom out

Zoom in

1/120

1 Wearing parts / 2 Warranty / 3 Safety regulations

ENGLISH 4

1 Wearing parts

Various parts are subject to application-specific

wear or to normal wear and must be replaced in

good time if necessary.

The following parts are subject to normal wear and

are not covered by the manufacturers guarantee:

 All rubber parts that come into contact with the

spraying agent

 Spray nozzle

 Filters

 Seals

 Rechargeable battery

 Fuse

2 Warranty

We warrant problem free quality and will cover the

cost of replacing parts which are found to be faulty

in material or show manufacturing defects within

the prescribed guarantee period after the date of

purchase.

Please note that specific guarantee conditions may

differ from country to country.

When in doubt, please ask the vendor of the

goods. The vendor of the product is responsible for

guarantee applications.

We hope you will understand that we cannot be

liable for damage resulting from these causes:

 Non-compliance with operating instructions.

 Neglecting required maintenance and repair

jobs.

 Wear from normal use (particularly: gasket

seals, membranes, collars, spray nozzles and

filters).

 Using non-approved tools.

 Use of force, improper treatment, misuse and

accidents.

 Attempted adjustments and repairs by

non-qualified persons.

 Unauthorized modification or changes made to

the device.

 Use of unsuitable spare parts or non-genuine

parts if such parts are the cause of the damage.

 Use of non-approved media in the spraying

agent tank.

 Damage caused by using the product in the hire

or rental industry.

Normal cleaning, adjustments or maintenance jobs

cannot be claimed as part of the guarantee.

All guarantee work must be carried out by one of

our authorised service centres.

3 Safety regulations

3.1 Correct use / areas of application

 This pressure sprayer must only be used for the

purpose of applying approved liquid plant

protection agents, pesticides, insecticides, weed

killer (herbicides) and liquid fertilizers available

from authorised specialist dealers as well as for

the purpose of applying clean water.

 Observe all instructions provided by the spraying

agent manufacturer.

 We recommend using only spraying agents that

have been approved for use as spraying agent

for the above mentioned areas of application by

the relevant authorities in your country.

 The pressure sprayer must only be used for

applications in agriculture, tree nurseries,

forestry, fruit and vegetable growing, vineyards,

home and garden and greenhouse cultivation

with adequate ventilation.

 The pressure sprayer must not be used for any

other purposes, e.g., for the spraying of liquid

paint or applying any other media than the

above mentioned liquids!

Particularly, aggressive, acid- or solvent-

containing liquids, disinfectants or impregnating

agents must not be sprayed with this device!

 Never use fluids with a temperature in excess of

40 °C [104 °F].

 To enable the operator in connection with the

spraying agent manufacturer to check the

material resistance to certain chemicals, we will

provide details of the type of materials used for

the pressure sprayer.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solo 416 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solo 416 Manual

Product: